The following packages are required to build this project:
You will also need CMake of minimum version 3.12.0 and Clang of minimum version 13.0.0. These can be acquired through the following iRODS externals packages:
To build, run the following:
mkdir -p build && cd build
cmake ..
make packageThis project uses a "build hook" which allows the iRODS Development Environment to build packages in the usual manner. Please see the instructions for building plugins with the development environment: https://github.com/irods/irods_development_environment?tab=readme-ov-file#how-to-build-an-irods-plugin
It is highly recommended that TLS/SSL be required in the server when using this plugin for authentication. More information about configuring iRODS to use TLS/SSL can be found here: https://docs.irods.org/4.3.2/plugins/pluggable_authentication/#server-ssl-setup
R_GRID_CONFIGURATION for TTLThis plugin uses the standard set of authentication configurations found in R_GRID_CONFIGURATION for configuring Time-To-Live (TTL) on authenticated "sessions". You can read about these configurations here: https://docs.irods.org/4.3.2/system_overview/configuration/#authentication-configuration
pam_stack_namepam_stack_name gives the iRODS administrator the ability to specify a PAM stack to use for pam_interactive authentication. Historically, the plugin has required that /etc/pam.d/irods be the name of the PAM stack file to use. With this configuration option, the administrator can specify a different PAM stack name to use.
The value of pam_stack_name must be a string which refers to the name of a file in /etc/pam.d or a service in /etc/pam.conf on the catalog service provider. In the absence of this configuration, a default value of "irods" is used. For example, if an administrator wishes to use a PAM stack called /etc/pam.d/super-secure-auth with pam_interactive which is in use by other services within the system, rather than changing the name of the PAM stack to irods, the administrator can change the pam_stack_name value to super-secure-auth to leverage the same PAM stack as other services.
Note: The value of this configuration is used as the value for the service_name argument for pam_start. If the configured pam_stack_name does not exist in /etc/pam.d or /etc/pam.conf, the PAM system will fall back to its default behavior. This default behavior varies from platform to platform, so the administrator should take care that the system is properly configured. For more information about configuring PAM services, see the documentation: https://linux.die.net/man/5/pam.conf. For more information about pam_start, see the documentation: https://linux.die.net/man/3/pam_start
The configuration option is set in the server's server_config.json file (for packaged installations, this is found in /etc/irods). Here is how to configure pam_stack_name:
"plugin_configuration": {
"authentication": {
"pam_interactive": {
"pam_stack_name": "irods"
}
}
}insecure_modeinsecure_mode gives the iRODS administrator the ability to allow for non-TLS/SSL-enabled communications between the client and the server for authentications using pam_interactive. TLS/SSL is required by default when using this plugin because sensitive user information is sent over the network to communicate with the PAM service via the catalog service provider. It is highly recommended to leave this configuration option at its default value of false. The configuration option has been introduced for demo and testing purposes.
If the value is set to true and the user attempting to authenticate using this plugin does not have TLS/SSL enabled in the client-server communications, it is allowed, and a warning message is written to the server log to remind the administrator that sensitive user information is being sent over the network without encryption. If the value is set to false, a SYS_NOT_ALLOWED error will be returned if the user attempting to authenticate using this plugin does not have TLS/SSL enabled in the client-server communications. In the absence of this configuration, a default value of false is used.
The configuration option is set in the server's server_config.json file (for packaged installations, this is found in /etc/irods). Here is how to configure insecure_mode:
"plugin_configuration": {
"authentication": {
"pam_interactive": {
"insecure_mode": false
}
}
}The server-side plugin includes a logging category which can be configured in server_config.json under the log_level section like so:
"log_level": {
// ... Other Log Categories ...
"pam_interactive_auth_plugin": "info",
// ... Other Log Categories ...
},Set the irods_authentication_scheme in the client environment to pam_interactive.
The client environment should be configured to use TLS/SSL if the server requires TLS/SSL. More information about configuring the iRODS client environment to use TLS/SSL can be found here: https://docs.irods.org/4.3.2/plugins/pluggable_authentication/#client-ssl-setup
pam_password)This plugin can be used as a drop-in replacement for pam_password and the legacy PAM authentication plugin (with the exception of some differing prompts). Here's how to set it up.
In order to use the plugin in this case, a PAM user with a password must exist and be permitted to authenticate in the Linux environment with a password. There must also exist an iRODS user in the local zone with the same name as the PAM user. For example, if there is a PAM user named alice to whom we want to give iRODS access, an iRODS user named alice must also exist in the zone with which the user will be authenticating.
Here is a simple way to create a Linux user with a password (note: this requires root access):
sudo useradd -m alice # the -m means "create a home directory"
sudo usermod -p password_for_alice aliceHere is a simple way to create an iRODS user (note: this requires rodsadmin permissions):
iadmin mkuser alice rodsuserConfigure the irods PAM stack as described in the documentation for PAM authentication (see https://docs.irods.org/4.3.2/plugins/pluggable_authentication/#pam-pluggable-authentication-module):
$ cat /etc/pam.d/irods
auth required pam_env.so
auth sufficient pam_unix.so
auth requisite pam_succeed_if.so uid >= 500 quiet
auth required pam_deny.soSwitch to the Linux user that we wish to authenticate. The user should be able to run iinit and see the following:
$ iinit
Enter your iRODS user name: alice
Password: If "Password" is entered correctly, the user will be authenticated with iRODS, just like pam_password. The "Password" prompt is coming from the pam_unix module. For more information about this module, see the documentation in man pam_unix, or https://linux.die.net/man/8/pam_unix.
This plugin can be used as a replacement for the Kerberos authentication plugin (https://github.com/irods/irods_auth_plugin_kerberos). Here's how to set it up.
Make sure that your organization has a Kerberos service. For information about how to do this, please see the official Kerberos documentation: http://web.mit.edu/kerberos/krb5-current/doc/admin/install.html In the "Additional References", the Kerberos team has provided an externally written guide for installing and configuring Kerberos on Debian-based systems which may prove helpful: http://techpubs.spinlocksolutions.com/dklar/kerberos.html#intro
In order to use the plugin in this case, a Kerberos user with a password must exist and be permitted to authenticate in the Kerberos environment with a password. There must also exist an iRODS user in the local zone with the same name as the Kerberos user. For example, if there is a Kerberos user named alice to whom we want to give iRODS access, an iRODS user named alice must also exist in the zone with which the user will be authenticating.
Here is a simple way to create a user in Kerberos (note: requires admin privileges in Kerberos). First, run kadmin and authenticate as the Kerberos administrator (if you are connected directly to a Kerberos administration server, you can use kadmin.local). Then, you can run this to create an unprivileged user:
addprinc -policy user aliceHere is a simple way to create an iRODS user (note: this requires rodsadmin permissions):
iadmin mkuser alice rodsuserIn order to use Kerberos via PAM, we need to install the Kerberos PAM module, pam_krb5. Locating this software package is an exercise left to the reader. If all else fails, the .tar.gz files and source code can be found here: https://www.eyrie.org/~eagle/software/pam-krb5
For more information about this module, see the documentation in man pam_krb5, or https://linux.die.net/man/8/pam_krb5.
Configure the irods PAM stack as described in the documentation for PAM authentication (see https://docs.irods.org/4.3.2/plugins/pluggable_authentication/#pam-pluggable-authentication-module):
$ cat /etc/pam.d/irods
auth sufficient pam_krb5.so minimum_uid=1000
auth requisite pam_deny.so
auth required pam_permit.soNote: The PAM stack doesn't have to look exactly like this. For instance, Linux authentication via pam_unix can be used as a backup if Linux users exist and are allowed to authenticate with a password in your system. This example is just demonstrating Kerberos authentication for iRODS via PAM in a very simple manner.
Switch to the PAM user that we wish to authenticate. The user should be able to run iinit and see the following:
$ iinit
Enter your iRODS user name: alice
Password: If "Password" is entered correctly, the user will be authenticated with iRODS. The "Password" prompt is coming from the pam_krb5 module.
Running the tests for this plugin should be familiar to those who have run tests for other iRODS plugins. This repository provides a test hook which is used by the iRODS Testing Environment. You can read about how to run plugin tests in the testing environment here: https://github.com/irods/irods_testing_environment/?tab=readme-ov-file#run-irods-plugin-tests Please note that using the --use-ssl option with the testing environment could cause tests to be skipped, so, as usual, please be mindful of which options are being used when running tests.
In order to run tests aside from the tools provided by the testing environment, one can use the run_tests.py script provided by the iRODS server package:
python3 scripts/run_tests.py --run_specific_test test_irods_auth_plugin_pam_interactiveUse the --help option for run_tests.py to learn about other options. Please note that the test files are installed with the server package produced by this repository so it is assumed that a packaged installation is being used. If not, make sure that the test files in the packaging directory are placed alongside the other iRODS test files (for default packaged installations, this should be /var/lib/irods/scripts/irods/test).