archiso for Lenovo ThinkPad X13s

This repository contains a customized archiso preset for building images for the ThinkPad X13s ARM laptop. Pre-built images are available in Releases. These images use a custom kernel/firmware to make the iso work reliably.

X13s specific packages can be found here.

Boot instructions

1. Download the latest Pre-built image
2. Flash to a USB dd bs=4M if=archlinuxarm-YYYY.MM.DD-aarch64.iso of=<DEV-TARGET> conv=fsync oflag=direct status=progress
3. Reboot the laptop, and press F12 when the Lenovo logo appears
4. Select the USB to boot

Installation

The instructions in the Installation_guide mostly apply, however there are some things specific to the X13s to be aware of:

• The internal drive is /dev/nvme0n1, and USB storage will be /dev/sdX.
• The X13s ships with an existing EFI system partition on the internal drive that you can use /dev/nvme0n1p1.
• Currently, the regular linux-aarch64 and linux-aarch64-rc kernels don't work, until this is sorted out you can use the ironrobin-x13s repository and install linux-x13s from it.
• The ironrobin-x13s repo will be missing from the target system's pacman.conf, make sure to edit it and add this if you want to use X13s packages

  [ironrobin-x13s]
  Server = https://github.com/ironrobin/x13s-alarm/releases/download/packages

You'll need to trust the public key in order to verify package signature:

sudo pacman-key --recv-keys 6ED02751500A833A
sudo pacman-key --lsign-key 6ED02751500A833A

If this project helped you, you can buy me a cup of coffee :)



DOGE address: DRUZaJueWL3G7Y6d9MSBx23vcVcbuQ9kQQ