Acer Nitro 5 AN515-54 Monterey

macOS Monterey on Acer Nitro 5 AN515-54 with OpenCore 0.7.8 EFI folder.

Screeshots

Configuration

What's working

• [x] Audio (Input & Output)
• [x] iGPU
• [x] ACPI Display brightness
• [x] Ethernet
• [x] Sleep + Wake
• [x] Smart Touchpad + Gestures
• [x] WiFi (2.4Ghz and 5GHz)
• [x] Native hotkey support with Fn keys
• [x] iServices (Messages, FaceTime, etc.)

What's not working

• [ ] GTX 1650 (macOS does not support recent Nvidia GPUs).
• [ ] HDMI port (since it's connected to the GTX 1650).
• [ ] Micron 2200 ssd is not supported, have to disable it manually in BIOS before booting.

If anyone interested to buy, DM Me on any of my social mentioned in Profile. I have one to sell.

If you still want to use an external monitor, you can by a USB 3.0 to HDMI adapter.

The one I'm currently using is: https://www.amazon.in/dp/B013G4CJM8/?coliid=I21IXZ0W5ZAFHX&colid=IWBALZYIADBW&psc=0&ref_=lv_ov_lig_dp_it

Installation

How To Install

• Format your USB "non-bootable" using RUFUS and delete any leftover in USB(autoruns).
• Create directory "EFI" in your EFI Partition (eg. Pendrive or Haarddrive).
• Clone this repo and paste contents of "EFI" directory (BOOT and OC) onto created directory.
• Create a director "com.apple.recovery.boot" in USB.
• Paste contents of Basesystems files downloaded using Opencore onto created directory.
• Download GenSMBIOS to generate unique SMBIOS information. Run it and select Generate SMBIOS, as model sekect MacBookPro16,4.
• Open config.plist with ProperTree and go to platforminfo > Generic. Set MLB( Board Serial), SystemSerialNumber(Serial), and SystemUUID (SmUUID) to generate values.
• Boot it!.

First-time installation

• Set-up the BIOS configuration:
  • Boot to BIOS by pressing F2 during boot.
  • In the Main screen, enable F12 boot menu, disable Fast Boot, then press Ctrl+S and change the new SATA mode option to AHCI.
  • In the Boot screen, disable secure boot.
  • Finally, go to the Exit screen and select "Exit saving changes".
• Read through the following tutorial to create a bootable USB, and then place the EFI folder inside it:
  • https://dortania.github.io/OpenCore-Install-Guide/
• You should add Serial Number, UUID, MLB and ROM details to Config -> PlatformInfo -> Generic if you want to get iServices working as explained here.

Post Install

• Clone the ComboJack repo and run the installer inside the ComboJack_Installer folder to get the jack port working correctly.
• Run the following commands for sleep wake:

  sudo pmset -a hibernatemode 0
  sudo pmset -a autopoweroff 0
  sudo pmset -a standby 0
  sudo pmset -a proximitywake 0