Victron Instant Readout Integration
This integration allows exposing data from Victron devices with Instant Readout enabled in Home Assistant.
Supported Devices & Entities:
- SmartShunt 500A/500mv and BMV-712/702 provide the following data:
- Voltage
- Alarm status
- Current
- Remaining time (mins)
- State of charge (%)
- Consumed amp hours
- Auxilary input mode and value (temperature, midpoint voltage, or starter battery voltage)
- Smart Battery Sense
- Voltage
- Temperature (°C)
- MPPT/Solar Charger
- Charger State (Off, Bulk, Absorption, Float)
- Battery Voltage (V)
- Battery Charging Current (A)
- Solar Power (W)
- Yield Today (Wh)
- External Device Load (A)
- Inverter
- Device State (Off, Inverting)
- Battery Voltage (V)
- AC Voltage (V)
- AC Current (A)
- AC Apparent Power (VA)
- VE.Bus Adapter (works with Multiplus Inverters)
- Device State (Off, Inverting)
- Battery Voltage (V)
- Battery Current (A)
- Battery Temperature (°C)
- Battery State of Charge (%)
- AC Input State (AC_IN_1, AC_IN_2, NOT_CONNECTED)
- AC Input Power (W)
- AC Output Power (W)
- Orion Tr DC/DC Converter
- Operation Mode
- Input Voltage (V)
- Output Voltage (V)
- Off Reason
- Charger Error
- Orion XS DC/DC Converter
- Operation Mode
- Input Voltage (V)
- Input Current (A)
- Output Voltage (V)
- Output Current (A)
- Off Reason
- Charger Error
Installation
Manual
- Clone the repository to your machine and copy the contents of custom_components/ to your config directory
- Restart Home Assistant
- Setup integration via the integration page.
HACS
- Add the integration through this link:
- Restart Home Assistant
- Setup integration via the integration page.