TamaLib is a hardware agnostic Tamagotchi P1 emulation library built from scratch. It is self-contained and aims at running on any platform powerful enough, from microcontrollers (MCUs) to desktop computers, thus spreading virtual life across the digital world.
So far, it has been successfully implemented on different platforms:
TamaLIB cannot be used as is. In order to create life on a specific target, you need to import all TamaLIB related .c and .h files in your project (for instance in a lib subfolder), to create a hal_types.h file using the template provided and to implement the hal_t structure, that will act as an abstraction layer between TamaLIB and your OS or SDK (detailed information can be found in hal.h). This abstraction layer basically connects TamaLIB to your target's buttons, clock, audio and screen, while also defining the C types that TamaLIB should use to represent 4-bit, 5-bit, 8-bit, 12-bit, 13-bit and 32-bit variables. Once done, you will be able to call the TamaLIB API from your project.
Basically:
/* ... */
/* Register the HAL */
tamalib_register_hal(&my_hal);
/* ... */
/* Initialize TamaLIB */
tamalib_init(my_program, my_breakpoints, 1000000); // my_breakpoints can be NULL, 1000000 means that timestamps will be expressed in us
/* ... */
/* Enter TamaLIB's loop */
tamalib_mainloop();
/* ... */
/* Release TamaLIB */
tamalib_release();
/* ... */Your main project should then forward any button input to TamaLIB using the tamalib_set_button() function.
As an alternative to tamalib_mainloop(), you can call tamalib_step() directly if your execution flow requires something more complex than a simple mainloop. In that case, TamaLIB will neither call the HAL handler() function, nor the HAL update_screen() function by itslef.
TamaLIB is distributed under the GPLv2 license. See the LICENSE file for more information.
The Tamagotchi P1 is based on an
E0C6S46 Epson MCU,
and runs at 32,768 kHz. Its LCD is 32x16 B/W pixels, with 8 icons.
To my knowledge, the ROM available online has been extracted from a high-res picture of a die. The ROM mask was clear enough to be optically read. The pictures can be seen there (thx asterick for the link !).
I would love to see the same work done on a P2 and add support for it in TamaLIB/TamaTool !
__
Copyright (C) 2021 Jean-Christophe Rona