Bird Buddy Home Assistant Integration

Custom integration for Bird Buddy.

This component makes use of the pybirdbuddy library for API calls, also available on PyPI.

Prior To Installation

You will need your Bird Buddy email and password.

Note

If your BirdBuddy account was created using SSO (Google, Facebook, etc), those methods will not work currently. To work around that, you can sign up a new account using email and password, and then invite that new account as a member of your main/owner account. Be aware that certain information or functionality may not be available to member accounts (for example, "off-grid" settings and firmware version).

Alternatively, you may reset the Bird Buddy unit and re-pair it with a new account that was created with a password. See Bird Buddy support for more information.

Installation

With HACS

1. Open HACS Settings and add this repository (https://github.com/jhansche/ha-birdbuddy/) as a Custom Repository (use Integration as the category).
2. The Bird Buddy page should automatically load (or find it in the HACS Store)
3. Click Install
4. Continue to Setup

Alternatively, click on the button below to add the repository:

Manual

Copy the birdbuddy directory from custom_components in this repository, and place inside your Home Assistant Core installation's custom_components directory.

Setup

1. Install this integration.
2. Navigate to the Home Assistant Integrations page (Settings --> Devices & Services)
3. Click the + Add Integration button in the bottom-right
4. Search for Bird Buddy

Alternatively, click on the button below to add the integration:

Devices

A device is created for each Bird Buddy feeder associated with the account. See below for the entities available.

Entities

Some entities are disabled or hidden by default, if they represent an advanced use case (for example, the "Signal" and "Recent Visitor" entities). There are also some entities that are disabled by default because the support is not yet enabled by the Bird Buddy API (for example, the Temperature and Food Level sensors are not yet enabled by Bird Buddy).

More entities may be added in the future.

Media

Bird species and sightings that have already been collected from postcards can be viewed in the Home Assistant Media Browser. To collect a postcard you will need to use the mobile app to open the postcards as they arrive. Only opened postcards can be viewed in the Media Browser (same as the Collections tab in the Bird Buddy app).

Events

birdbuddy_new_postcard_sighting

This event is fired when a new postcard is detected in the feed.

Some interesting fields from sighting include:

• sighting.medias[].contentUrl, .thumbnailUrl - time-sensitive URLs that can be used to download the associated sighting image(s)
• sighting.sightingReport.sightings[] - list of sightings grouped together in the postcard
  • The data here depends on the type of sighting (i.e., SightingRecognizedBird, SightingCantDecideWhichBird, etc)
  • Possible fields include .suggestions if the bird is not recognized, or .species for confidently recognized birds
• sighting.feeder.id - not generally useful as is, but can be used to filter automations to those matching the specified Feeder. This filter is applied automatically with the Device Trigger.

This event data can also be passed through as-is to the birdbuddy.collect_postcard service.

This event can also be added in an automation using the "A new postcard is ready" Device Trigger:

trigger:
  - platform: device
    domain: birdbuddy
    type: new_postcard
    device_id: <ha device id>
    feeder_id: <bird buddy feeder id>

Services

birdbuddy.collect_postcard

"Finishes" a postcard sighting by adding the media to the associated species collections, thus making them available in the Media Browser. This is the same effect as opening and saving the postcard in the Bird Buddy app.

Note

This service is not intended to be invoked manually, but should be used in conjunction with the birdbuddy_new_postcard_sighting event, device trigger, or Blueprint.

Attempting to call the service manually will likely fail, because the service requires the postcard and sighting data that would be included in the event.

Postcard sighting strategies:

• recognized (Default): collect the postcard only if Bird Buddy's AI identified a bird species. Note: the identified species may be incorrect. Also note that any sighting not recognized by the Bird Buddy API will be discarded.
• best_guess: In the "can't decide which bird" sightings, a list of possible species is usually included. This strategy will behave like recognized, but if the species is not recognized it will select the highest-confidence species automatically (assuming that confidence is at least best_guess_confidence, defaults to 10%). If none of the suggestions meet the best_guess_confidence strategy, the sighting will be discarded.
• mystery: Same behavior as best_guess, but if the bird is not recognized and no species meets the confidence threshold, collect the sighting as a "Mystery Visitor".

Automation example

trigger:
  - platform: event
    event_type: birdbuddy_new_postcard_sighting
  # OR a device trigger:
  - platform: device
    domain: birdbuddy
    type: new_postcard
    # $ids...
action:
  - service: birdbuddy.collect_postcard
    data:
      strategy: best_guess
      # pass-through these 2 event fields as they are
      postcard: "{{ trigger.event.data.postcard }}"
      sighting: "{{ trigger.event.data.sighting }}"

Blueprint

To simplify the combination of the trigger and the action of collecting the postcard, you can import a predefined Blueprint.

To add the Blueprint, use the button below:

or go to Settings > Automations & Scenes > Blueprints, click the Import Blueprint button, and enter this URL:

https://github.com/jhansche/ha-birdbuddy/blob/main/custom_components/birdbuddy/blueprints/collect_postcard.yaml

After the Blueprint has been imported, you still need to create an automation from that Blueprint. Also note that if we update the Blueprint here, your imported Blueprint will not automatically receive the update, and you may need to re-import it to get the update.