Acer Aspire E 15 E5-576G Hackintosh
macOS Catalina/Big Sur on Acer E5-576G
Configuration
| Specifications |
Detail |
| Computer model |
Acer Aspire E 15 E5-576G (MX150) |
| Processor |
Intel Core i5-8250U Processor |
| Memory |
8GB DDR3 1600MHz |
| Integrated Graphics |
Intel UHD Graphics 620 |
| Sound Card |
Realtek ALC255 (layout-id:30) |
| Wireless Card |
Intel Wireless 3165 |
Current Status in OpenCore
- Discrete graphic card is not working, since macOS doesn't support Optimus technology
- Have used SSDT-DGPU to disable it in order to save power
- Intel Bluetooth may cause sleep problems and does not support some Bluetooth devices
- Intel Wi-Fi(Intel Wireless 3165) is working
- Buy a USB Wi-Fi dongle or supported wireless card
- Use AirportItlwm to enable Intel Wi-Fi
- Using a HDMI-VGA adapter to connect an external monitor causes lag and black screen for unknown reason, but using either a HDMI-HDMI or VGA-VGA direct connection is fine.
- Everything else should work well
Installation
First-time installation
- Please refer to the following installation tutorials
- You can refer to the following tutorials for additional configuration
- If you intend to dual boot Windows on the same drive, it is recommended that you install Windows first, and then resizing the EFI System Partition (ESP) too at least 200MB with any partition assistant you like (but avoid GParted).
- If there's any partition to the left of the Windows partition which you would have to shrink to extend the ESP, move it to the right side of the Windows partition so you can successfully resize the ESP.
- It is highly recommended that you use ProperTree to make any changes to the config.plist in
\EFI\OC, otherwise you may corrupt the file.
- Add
BOOT and OC folders to your EFI partition.
- As our laptop is only boots from
\EFI\Microsoft\Boot\bootmgfw.efi (or maybe not, I didn't bother to mess with the EFI boot map just yet), you will have to rename \EFI\Microsoft\Boot\bootmgfw.efi to \EFI\Microsoft\Boot\bootmgfw-orig.efi and copy \EFI\refind\refind.efi to \EFI\Microsoft\Boot and rename it as \EFI\Microsoft\Boot\bootmgfw.efi so you will see the refind boot picker every time.
- It is no longer required to rename
\EFI\Microsoft\Boot\bootmgfw.efi to \EFI\Microsoft\Boot\bootmgfw-orig.efi from OC 0.5.8. Instead, we will use the new Bootstrap option in OC 0.5.8 to prevent Windows from replacing \EFI\Microsoft\Boot\bootmgfw.efi.
- For users with the E5-576G-59S6, please remove
\EFI\OC\ACPI\SSDT-TPDE.aml and keep \EFI\OC\ACPI\SSDT-TPD1.aml. Also remove \EFI\OC\config.plist and rename \EFI\OC\config_59S6.plist to EFI\OC\config.plist due to issues with the touchpad. Other users of E5-576G will only need to keep \EFI\OC\ACPI\SSDT-TPDE.aml and \EFI\OC\config.plist, \EFI\OC\ACPI\SSDT-TPD1.aml and \EFI\OC\config_59S6.plist can be removed, unless a different touchpad patch needs to be made for your mode l too.
FAQ
My touchpad isn't working after update.
You need to rebuild the kext cache after every system update. Use Kext Utility.app or type sudo kextcache -i / in Terminal.app. Then restart. If this still doesn't work, try to press F9.
My screen turns to black and has no response during the updating process.
If you have black screen for five minutes and get no response from the device, please force restart your laptop(Long press power button) and choose Boot macOS Install from ~ entry.
Credits
- Thanks to Acidanthera for providing AppleALC, AppleSupportPkg, Lilu, OcBinaryData, OpenCorePkg, VirtualSMC, VoodooInput, VoodooPS2, and WhateverGreen.
- Thanks to alexandred for providing VoodooI2C.
- Thanks to daliansky for providing OC-little, the template for this Readme, many valuable samples in patching SSDT and various ACPI patches for OpenCore.
- Thanks to jsassu20 for providing samples for patching the brightness keys i ACPI.
- Thanks to Sniki for providing OS-X-USB-Inject-All.
- Thanks to corpnewt for providing USBMap and ProperTree.
- Thanks to zxystd for providing IntelBluetoothFirmware.