NOTE - I consider the 1.0.X series to be "still in development" and breaking changes can occur at any time. 1.1.0 will be the first "stable" release. This is due to a combination of factors, mostly centered around my inexperience with Java packaging and trying to get something to "just work".
This library is meant to help with handling the NXP NTAG 424 DNA chip. Note that the library itself is completely hardware agnostic, and requires adding in a "transceiver" to manage the NFC hardware details. See more about that in the Usage section.
Note that this is very much a work-in-progress and you should expect things to be moved around and renamed quite a bit for the time being. The current API should not be considered stable.
This library is primarily based on the NXP document NT4H2421Gx, available here.
Page numbers (often referenced in the code) are from revision 3.0.
Note that this library was built almost entirely from the referenced documents. I have no real experience with NFC, so I really don't know what is specific to this chip, to NXP generally, or to some other standard. If you have suggestions on how to refactor this to support more NFC tags, I'm certainly open to it.
Note that there is a companion library for reading SUN messages that this chip can generate here.
Other important documents to read:
This library is built with Maven. To build, just do:
mvn clean installAnd it will produce a JAR file named target/ntag424-VERSION.jar.
To install, just copy the JAR built in the previous section into your JAR folder.
For an Android project, this is usually in the app/libs directory.
The examples directory has an Android project that uses this library. It contains a built jar, but, if it ineeds updating, you can run ./copyjar.sh out of that directory after doing an mvn clean install in the main directory to copy the new version in.
The intended usage of this library is within an Android project, though it is written so that it could be used with non-Android NFC hardware.
Basic information about NFC tag reading in Android is available here.
Assuming that you have discovered a tag through an Intent (named tagIntent in the code below), you can use the library as follows:
import android.nfc.Tag;
import android.nfc.tech.IsoDep;
import net.bplearning.ntag424.Constants;
import net.bplearning.ntag424.DnaCommunicator;
import net.bplearning.ntag424.command.GetCardUid;
import net.bplearning.ntag424.encryptionmode.AESEncryptionMode;
...
Tag tag = tagIntent.getParcelableExtra(NfcAdapter.EXTRA_TAG);
IsoDep iso = IsoDep.get(tag);
new Thread(() -> {
try {
iso.connect();
// Connect the library to the Android tag transceiver
DnaCommunicator communicator = new DnaCommunicator();
communicator.setTransceiver((bytesToSend) -> iso.transceive(bytesToSend));
// This is required to use the functionality of the chip. It's a weird NFC thing.
IsoSelectFile.run(communicator, IsoSelectFile.SELECT_MODE_BY_FILE_IDENTIFIER, Constants.DF_FILE_ID);
// Try to authenticate with the factory key and start an encrypted session
if(AESEncryptionMode.authenticateEV2(communicator, 0, Constants.FACTORY_KEY)) {
// Run an encrypted command to get the Card UID
byte[] cardUid = GetCardUid.run(communicator);
} else {
// Failed to authenticate
}
} catch(IOException e) {
// Always expect IOExceptions - they can happen even from someone not holding the
// tag in place long enough.
}
}).start();
The way the code works is that it is split into four basic parts:
run which perform the task. The first argument is always the DnaCommunicator object. This was so that commands could be easily added without junking up the main DnaCommunicator class. These currently reside in the net.bplearning.ntag424.command package.This library supports the LRP (leakage-resistant primitive) encryption mode. However, you have to configure the tags to use LRP, and then, once they are in LRP mode, they cannot be switched back to AES mode. To set a tag to LRP mode, authenticate (as shown above), and then do:
import net.bplearning.ntag424.command.SetCapabilities;
SetCapabilities.run(communicator, true);After doing that, AES encryption mode will NOT be available on the tag, and you CANNOT get it back.
you will then need to change out your authentication function from AESEncryptionMode.authenticateEV2 to LRPEncryptionMode.authenticateLRP.
The LRP encryption is based on the NXP Document AN12304, available here.
Page numbers are from version 1.1.
Also note that there is a Go implementation of LRP available here.
This library has some utility functions for performing SDM and generating SUN (Secure Unique NFC) messages.
This is currently in flux, but the way it works right now is as follows:
Step 3 will probably be removed at some point and this functionality will be integrated into another class. Probably. We may also incorporate some special commands to make some of this easier.
Here is some example code:
// Generate a new SDMSettings object and set the access permissions
SDMSettings sdmSettings = new SDMSettings();
sdmSettings.sdmMetaReadPerm = Constants.ACCESS_EVERYONE; // Set to a key to get encrypted PICC data
sdmSettings.sdmFileReadPerm = Constants.ACCESS_KEY2; // Used to create the MAC and Encrypt FileData
sdmSettings.sdmReadCounterRetrievalPerm = Constants.ACCESS_NONE; // Not sure what this is for
// Create the NDEF record and make appropriate updates to SDMSettings
byte[] ndefRecord = master.generateNdefTemplateFromUrlString("https://www.example.com/{UID}{COUNTER}/{MAC}", sdmSettings);
// Write the data to the NDEF file
WriteData.run(communicator, Constants.NDEF_FILE_NUMBER, ndefRecord);
// Get the existing file settings:
FileSettings ndeffs = GetFileSettings.run(communicator, Constants.NDEF_FILE_NUMBER);
// Make any modifications you would like to those settings/permissions
// ...
// Set the SDMSettings to the newly-created sdmSettings object
ndeffs.sdmSettings = sdmSettings;
// Make changes to the file
ChangeFileSettings.run(communicator, Constants.NDEF_FILE_NUMBER, ndeffs);After this, your tag should be using SDM. Note that the offsets will auto-expand to match the requirements of the template. Template pieces include:
{UID}: Mirror the UID here{COUNTER}: Mirror the SDM Read Counter here{PICC}: Put the encrypted PICC data here (encrypted with sdmMetaReadPerm key). If set, be sure to set usesLrp on the NDefMasterTemplate object (affects the size of the PICC data).{FILE}: Put the encrypted secret data here (encrypted with sdmFileReadPerm key). If set, be sure to set the fileDataLength of the NdefMasterTemplate object.{MAC}: Put the MAC data here.^: If set, this is the start of the location that will be used for MAC calculation. If unset, it just becomes the location of the start of the MAC, indicating to only MAC the PICC data. Or, if there is encrypted file data, it is set to be the start of the encrypted file data.Personally, I like to use {UID}{COUNTER} and {MAC} rather than {PICC} because, if there is a connection issue with the Internet, I at least know what UID my tag was wanting to be, even if I can't fully validate it.
You can also use this library on the "other side" to validate SDM messages and read their contents. For unencrypted PICC data, do the following:
PiccData picc = new PiccData(uid, readCounter, usesLrp);If the UID is not mirrored, set it to null. If the readCounter is not mirrored, set it to 0.
For encrypted PICC data, do the following:
PiccData picc = PiccData.decodeFromEncryptedBytes(encryptedBytes, key, usesLrp);Note that the key for decrypting the PICC data can be a different key from validating the MAC / decrypting the file data.
Therefore, you have to set this key with setMacFileKey().
Then, you can validate the MAC (use an empty byte array for the message if there isn't one):
picc.setMacFileKey(macFileKey);
picc.performShortMac(new byte[0]); // MAC on PICC-only data
picc.decryptFileData(filedata);This section describes some common ways to configure SDM. SDM has a lot of options, so just picking a starting point is sometimes difficult.
Personally, my preferred method is to create an NDEF URL that looks like this: "https://www.example.com/tagread/{UID}{COUNTER}/{MAC}"
Basically, this puts the UID and counter in plaintext. This means that if something is scanning but is not connected to the Internet, it can in fact read the UID off of the card from the URL. But, if you are connected to the Internet, it can do additional validation.
For general purposes, I personally recommend any additional information be stored on the server and retrieved rather than encoded into the card. It just makes life easier, because then you just have an NDEF record to deal with, and you can easily link the data to the card after-the-fact with minimal tooling. Basically, you have a card programmer, and, after the cards are programmed with your keys/URL, you can use other devices to tie those cards to something, and they don't need your encryption keys to do it.
Key diversification allows you to have a different key on each device so that if someone were to steal the keys from the tag (which is itself a very difficult thing to do) it would not help them to know the keys for the other tags.
On the other hand, for key diversification to work, you need to know which key is on which device. The standard way of doing this is by having a single master key which gets diversified by doing a CMAC using the master key with a combination of the tag's UID and some additional data known as the "diversification data" (this is used mostly to make sure the data is long enough to get a good CMAC).
Generally, the diversification data is constructed as follows.
First, decide on a "system identifier".
This is a few bytes which is often an ASCII-ized version of your application name.
If your application is named "foo" then your system identifier is new byte[] {0x66, 0x6f, 0x6f}.
Then, use the KeyInfo class to construct your key.
Note that there is also an "application identifier" available.
I am not clear what that is supposed to be, but the document this is based on (AN10922) uses the "3-byte DESfire AID" (0x3042F5) in its example, so that is the default here.
byte[] masterKey = new byte[]{ /* Your master key here */ };
KeyInfo keyInfo = new KeyInfo();
keyInfo.key = masterKey;
keyInfo.systemIdentifier = new byte[] {0x66, 0x6f, 0x6f};
keyInfo.diversifyKeys = true;
byte[] cardKey = keyInfo.generateKeyForCardUid(uidBytes);Note that usually the key that is used for encrypting PICC data (if any) is not diversified, because you need to know that key before you know the UID. Then, once the UID is obtained, then that can be used to generate a UID-specific diversified key that is used for the file data encryption (if any) and the MAC (which is almost always used).
I think the general convention is to use App Key 2 for your non-diversified PICC encryption key, and then use App Key 3 for your diversified key. Note, however, that your diversified key SHOULD NOT be just a diversification of your non-diversified key. It should be based on a separate master key. Otherwise, if someone were to decode one of your tags, obtaining the key would give them all the information they needed to generate and fake diversified keys. Keeping the master key for your diversified keys secret is an absolute imperative for the system to work.
An easy way to generate a key is with the following command:
head -c 16 /dev/random|xxd -p