Ksenia Lares 48IP integration for home assistant. Compatible with BTicino alarm systems.
This integration will set up the following platforms.
Platform | Description |
---|---|
binary_sensor |
For each zone, defaults to movement sensor. |
sensor |
For each partition, showing the ARM status. |
alarm_control_panel |
ARM and disarm based on partitions and scenarios |
switch |
Bypass zones/partitions |
This integration relies on the web interface to be activated, this is not always the case. Please contact your alarm intaller for more information on activation.
This integration is available in HACS (Home Assistant Community Store).
configuration.yaml
).custom_components
directory (folder) there, you need to create it.custom_components
directory (folder) create a new folder called ksenia_lares
.custom_components/ksenia_lares/
directory (folder) in this repository.The KSENIA Lares alarm uses more complex scenarios then the default states of the home assistant alarm (away, night, home). A mapping is needed between the Home Assistant states and the KSENIA Lares scenarios (for activation) and zones/partitions (for state).
Go to integration to setup the mapping.
To be able to bypass zones, you will need to configure a PIN to be used.