weewx-aqi

What is it?

weewx-aqi is not an air quality monitor. Instead, it calculates an air quality index from various pollutants. Air quality indices are single numbers that are meant to succinctly describe how safe the air is. weeex-aqi can calculate the following indices:

Australia's Air Quality Index
Australia's Interim Web Reporting Particulate Index (February 2020)
Canada's Air Quality Health Index
European Union's European Air Quality Index
European Union's Common Air Quality Hourly Index
India's National Air Quality Index
Mexico's Índice Metropolitano de la Calidad del Aire
United Kingdom's Daily Air Quality Index
United States's Air Quality Index
United States's NowCast Air Quality Index

Prerequisites

A source for air quality data, such as weewx-purpleair .

Installation

1) run the installer (from the git directory):

wee_extension --install .

2) restart weewx:

sudo /etc/init.d/weewx stop
sudo /etc/init.d/weewx start

This will install the extension into the weewx/user/ directory.

By default, the install script configures weewx-aqi for use with weewx-purpleair and calculates a United States's NowCast AQI. If you are not using weewx-purpleair, or wish to use a different air quality index, you will need to modify your weewx.conf.

When configuring a different air quality sensor, you need to set the data_binding of sensor readings, and provide a schema of columns to pollutants. along with a column storing the reading's timestamp in epoch seconds UTC, and a column with the semantics of WeeWx's usUnits. Optional columns for temperature, and atmospheric pressure are helpful, but not required.

The configurable schema columns are:

dateTime: required Timestamp of the reading in epoch seconds UTC.
usUnits: required Unit system the readings are stored in.
temp: optional Temperature at the sensor.
pressure: optional Atmospheric at the sensor.
pm2_5: optional Particulate matter smaller than 2.5 micrometers
pm10_0: optional Particulate matter smaller than 10 micrometers
co: optional Carbon monoxide
no2: optional Nitrogen dioxide
so2: optional Sulfur dioxide
o3: optional Ozone
nh3: optional Ammonia
pb: optional Lead

All air quality indices, with the exception of Canada's, can be calculated for a single pollutant. Additionally, all air quality indices can also calculate composite index. However, this index will only be calculated if readings are available for all of the requisite components.

After installation, you will need to modify your weewx.conf. Mainly, you will need to connect weewx-aqi to the data binding for the air sensor. Assuming you're using weewx-purpleair, you will need to add the following to your weewx.conf.

The default weewx.conf block is:

[AqiService]
    [[air_sensor]]
        pm2_5 = pm2_5_atm
        temp = purple_temperature
        data_binding = purpleair_binding
        dateTime = dateTime
        pressure = purple_pressure
        pm10_0 = pm10_0_atm
        usUnits = usUnits
    [[standard]]
        data_binding = aqi_binding
        standard = user.aqi.us.NowCast

Display the data

To make use of the plugin you will need to modify the templates in /etc/weewx/skins/*.tmpl to include references to the new data found in the aqi.sdb file.

Examples:

The Current Value

$latest($data_binding='aqi_binding').aqi_pm2_5

Maximum Value Today

$day($data_binding='aqi_binding').aqi_pm2_5.max

Time Today When The Maximum Value Occurred

$day($data_binding='aqi_binding').aqi_pm2_5.maxtime

Colors and Categories

AQIs have categorical labels associated with the AQI values. The index of the current category is available via $latest($data_binding='aqi_binding').aqi_pm2_5_category. The AQI color and category can be found using wrapping the index with the$aqi Cheetah template. Add to your skin.conf:

[CheetahGenerator]
    search_list_extensions = user.aqi.service.AqiSearchList

And then in your template (e.g. index.html.tmpl), you can add something similar to this example <DIV>, that illustrates display the AQI value, category, and color:

<div style="text-align: center; background-color: #$aqi($current($data_binding='aqi_binding').aqi_pm2_5_category).color;" >
    $current($data_binding='aqi_binding').aqi_pm2_5 <br/>
    $aqi($current($data_binding='aqi_binding').aqi_pm2_5_category).category
</div>

Units

AQIs are dimensionless.

You can also graph these values by adding the appropriate configuration to your skin.conf file:

    [[[dayaqi]]]
        data_binding = aqi_binding
        [[[[aqi_pm2_5]]]]

The values stored in the database are:

aqi_composite,
aqi_composite_category,
aqi_pm2_5,
aqi_pm2_5_category,
aqi_pm10_0,
aqi_pm10_0_category,
aqi_co,
aqi_co_category,
aqi_no2,
aqi_no2_category,
aqi_so2,
aqi_so2_category,
aqi_o3,
aqi_o3_category,
aqi_nh3,
aqi_nh3_category,
aqi_pb,
aqi_pb_category,

Additional utilities

aqi_backfill is a utility that allows you to backfill aqi.sdb according to the current weewx.conf.

Development Testing

cd weewx-aqi
python3 -m unittest

jonathankoren / weewx-aqi

readme