qemu_turrisos

Run TurrisOS inside QEMU

Quick How-to

   git clone https://github.com/jose1711/qemu_turrisos.git
   cd qemu_turrisos
   wget --output-document=zImage https://downloads.openwrt.org/snapshots/targets/armvirt/32/openwrt-armvirt-32-zImage
   mkdir root && cd root

   Turris OS3:
     wget --output-document=- https://repo.turris.cz/archive/omnia/3.2.1/omnia-medkit-201610271801.tar.gz | tar xvzf -

   Turris OS4:
     wget --output-document=- https://repo.turris.cz/archive/4.0.6/medkit/omnia-medkit-latest.tar.gz | tar xvzf -

   Turris OS5 (latest)
     wget --output-document=- https://repo.turris.cz/hbs/medkit/omnia-medkit-latest.tar.gz | tar xvzf -

   cd ..
   sudo ./start_omnia.sh
   configure using wizard in browser: https://192.168.1.1

Known issues

WAN connection is not detected in TOS3

Add ifname 'eth1 into /etc/config/network, then reboot.

config interface 'wan'
        option proto 'dhcp'
        option ifname 'eth1'

Guided mode may fail in TOS4

Resolution: skip it and configure network manually

Foris reports Remote Exception: Internal error Failed to obtain network info('<class 'foris_controller.exceptions.GenericError'>')

Edit /etc/config/network specifying wan interface:

config interface 'wan'
        option ifname 'eth1'
        option proto 'dhcp'
        option ip6assign '60'
        option dns '8.8.8.8 8.8.4.4'

reboot and then verify by running ifstatus wan