This project contains many of the Ansible playbooks that I use daily as a Systems Administrator in the pursuit of easy server task automation.
You will need to setup and install Ansible like you normally would before using what is presented here. Hint: it uses ansible. https://www.ansible.com
Optional: Create an ansible-everyday/bin/ansible_config file with the following content:
# Config file. Point to where your ansible config and host files are located.
ANSIBLE_CONF_PATH=
ANSIBLE_HOSTS_PATH=If you don't create the ansible_config file then the default ansible-everyday/conf directory will be used. Make sure to copy your ansible config and host files into that directory.
Requires the following Python modules to be installed locally on the machine you use:
python3-netaddrIf you see the error
localhost failed | msg: You need to install "jmespath" prior to running json_query filteron Centos 8/9 Stream (Presumably RHEL 8/9 as well) you will need to install
python3-jmespathAnsible >= 2.2 contains the stdout_callback plugin(s) option if you want human readability.
ansible.cfg
stdout_callback = <module_name>skippy, debug, minimal, yaml, unixy and many more. See: https://docs.ansible.com/ansible/2.5/plugins/callback.html
Modern Ansible seems to be split into pieces. Ansible Core no longer contains the callbacks. You may need to run the following to install them.
ansible-galaxy collection install community.general
ansible-galaxy collection listansible_decode-facts is a perl script that requires the following Perl modules to be installed on your local ansible machine:
File::Basename;
File::Slurp;
JSON::XS;Where you have place the ansible/bin/ directory add it to your path. Therefore, if you use a shell with name completion, it will make life easier for you.
Contained in the ansible-everyday/bin/ directory are shell scripts that invoke ansible-playbook and corresponding Playbook files in the ansbile-everyday/playbook/ directory.
A lot of these Ansible Playbooks ARE interactive as they are used by myself almost on a daily basis. Therefore you will have to fill out some information rather than to continually rewrite playbooks for very common tasks. These playbooks are not a substitute for writing Ansbile Playbooks in the traditional sense using roles and the like. You will still need to write those if you are deploying 100 new servers. These scripts/playbooks allow you to get those everyday administration tasks completed.
A lot of the playbooks are designed for RHEL (or it's derivatives eg Centos/Fedora) and Debian / Ubuntu derived systems but many are not and will work on other Operating Systems.
ansible_acl-get - retrive the ACL of a file / directory
ansible_acl-remove - remove an ACL on a file / directory
ansible_acl-set - set an ACL on a file / directory
ansible_acl-stat-file - get the information of a file / directory specified using stat
ansible_acl-xattr-get - get the Extended Attributes of a file / directory
ansible_boot-rhel-recreate-rescue-boot-image - recreate with rescue boot image for RHEL >=7 and Fedora Systems
ansible_deb-apt-autoremove - remove unused dependency packages for all module states except build-dep
ansible_deb-apt-file-search - find which Deb package provides a file
ansible_deb-apt-setup-shells - install a shell Deb package eg tcsh and profile files
ansible_deb-apt-update - check for Deb package updates
ansible_deb-apt-upgrade-deb - update / install Deb packages
ansible_deb-info - obtain information about a particular Deb package
ansible_deb-is-deb-installed - find out if a Deb package is installed on a remote host
ansible_decode-facts - produce some human readable facts from the Ansible json fact files
ansible_editors-setup-nano - set up the nano editor and config file
ansible_find-etc-opt-rmpnew-files - find leftover rpmnew / rpmsave files in the /etc and /opt directories
ansible_find-files - find files or directories. If the list of files are large then the list of files are uploaded instead of being displayed
ansible_gather-facts - gather facts about remote hosts and save to the facts/ directory
ansible_net-close-network-port-firewalld - close network port(s) on remote hosts. Firewalld
ansible_net-open-network-port-firewalld - open network port(s) remote hosts. Firewalld
ansible_net-list-all-zones-firewalld - list firewalld zone information
ansible_net-close-network-port-iptables - close network port(s) on remote hosts. IPTables
ansible_net-open-network-port-iptables - open network port(s) remote hosts. IPTables
ansible_openbsd-pkg-add-update-package - add or update packages on an OpenBSD system
ansible_openbsd-pkg-info-list-files - list the files of an installed OpenBSD package
ansible_openbsd-pkg-info-list-installed-packages - obtain a list of packages installed on an OpenBSD system
ansible_ping-hosts - use ansible to ping remote hosts. This is not a traditional ping command
ansible_rpm-info - obtain information about a particular RPM package
ansible_rpm-install-repo - install a 3rd party RPM repository
ansible_rpm-is-rpm-installed - find out if an RPM is installed on a remote host
ansible_rpm-list-files - list the files of an RPM package
ansible_rpm-setup-shells - install a shell RPM eg tcsh and profile files.
ansible_rpm-whatprovides - find which RPM package provides a file
ansible_rpm-yum-dnf-check-update - check for RPM package updates
ansible_rpm-yum-dnf-repolist - execute repolist all on RHEL hosts to show yum / dnf repository information.
ansible_rpm-yum-dnf-update-rpm - update / install RPM packages
ansible_scl-info - List any installed RHEL Software Collections using scl -l. Lists all collections or query by name
ansible_security-check-ssl-tls-certificate-expired - Checks SSL / TLS security certificate files to see whether they have expired or will expire
within the next 2 weeks
ansible_security-check-remote-ssl-tls-certificate-expired-https - Checks remotely via HTTPS request SSL / TLS security certificates to see whether
they have expired or will expire within the next 2 weeks
ansible_security-cve-2021-42574-42694-find_unicode_control2 - check for RHSB-2021-007 Trojan source attacks (CVE-2021-42574,CVE-2021-42694)
https://access.redhat.com/security/vulnerabilities/RHSB-2021-007
ansible_security-linux-bsd-github-speed47-spectre-meltdown-checker - more generic check for Kernel Side-Channel Attacks - CVE-2017-5754
CVE-2017-5753 CVE-2017-5715
https://github.com/speed47/spectre-meltdown-checker - also works on some BSD operating systems
ansible_security-rhel-cve-2017-6074 - check for use-after-free in the IPv6 implementation of the DCCP protocol in the Linux kernel - CVE-2017-607
https://access.redhat.com/security/vulnerabilities/2934281
ansible_security-rhel-cve-2017-14491- check for dnsmasq: Multiple Critical and Important vulnerabilities - CVE-2017-14491
https://access.redhat.com/security/vulnerabilities/3199382
ansible_security-rhel-cve-2017-1000251 - check for Blueborne - Linux Kernel Remote Denial of Service in Bluetooth subsystem - CVE-2017-1000251
https://access.redhat.com/security/vulnerabilities/CVE-2017-1000251
ansible_security-rhel-cve-2017-1000251 - check for Linux Kernel load_elf_binary does not allocate sufficient space - CVE-2017-1000253
https://access.redhat.com/security/vulnerabilities/CVE-2017-1000253
ansible_security-rhel-cve-2017-1000366 - check for Stack Guard Page Circumvention Affecting Multiple Packages CVE-2017-1000366
https://access.redhat.com/security/vulnerabilities/stackguard
ansible_security-rhel-cve-2018-3620-3645 - check for L1TF - L1 Terminal Fault Attack - CVE-2018-3620 / CVE-2018-3645
https://access.redhat.com/security/vulnerabilities/L1TF
ansible_security-rhel-cve-2018-3639 - check for Kernel Side-Channel Attack using Speculative Store Bypass - CVE-2018-3639
https://access.redhat.com/security/vulnerabilities/ssbd
ansible_security-rhel-cve-2018-12130 - check for MDS - Microarchitectural Store Buffer Data - CVE-2018-12130, CVE-2018-12126, CVE-2018-12127,
CVE-2019-11091 https://access.redhat.com/security/vulnerabilities/mds
ansible_security-rhel-cve-2018-12207 - check for Machine Check Error on Page Size Change - CVE-2018-12207
https://access.redhat.com/security/vulnerabilities/ifu-page-mce
ansible_security-rhel-cve-2019-5736 - check for runc - Malicious container escape - CVE-2019-5736
https://access.redhat.com/security/vulnerabilities/runcescape
ansible_security-rhel-tcp-sack-panic-cve-2019-11477-8-9 - check for TCP SACK PANIC - Kernel vulnerabilities - CVE-2019-11477,
CVE-2019-11478 & CVE-2019-11479 https://access.redhat.com/security/vulnerabilities/tcpsack
ansible_security-rhel-cve-2019-14835 - check for VHOST-NET guest to host escape - Kernel vulnerability CVE-2019-14835
https://access.redhat.com/security/vulnerabilities/kernel-vhost
ansible_security-rhel-cve-2020-10713 - Boot Hole Vulnerability - GRUB 2 boot loader
https://access.redhat.com/security/vulnerabilities/grub2bootloader
ansible_secuitry-rhel-DNSpooq - Multiple vulnerabilities within dnsmasq CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684,
CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
https://access.redhat.com/security/vulnerabilities/RHSB-2021-001
ansible_security-rhel-cve-2021-3156 - Privilege escalation via command line argument parsing - sudo
https://access.redhat.com/security/vulnerabilities/RHSB-2021-002
ansible_security-rhel-cve-2020-14372 - ACPI Secure Boot vulnerability - GRUB 2 CVE-2020-14372
https://access.redhat.com/security/vulnerabilities/RHSB-2021-003
ansible_security-rhel-cve-2021-30465 - RHSB-2021-004 Symlink-Exchange attack - runc - CVE-2021-30465
https://access.redhat.com/security/vulnerabilities/RHSB-2021-004
ansible_security-rhel-cve-2021-33909 - RHSB-2021-006 Long path name in mountpoint flaws in the kernel and systemd
https://access.redhat.com/security/vulnerabilities/RHSB-2021-006
ansible_security-rhel-cve-2021-43527 - RHSB-2021-008 NSS Memory corruption when decoding DSA signatures
https://access.redhat.com/security/vulnerabilities/RHSB-2021-008
ansible_security-rhel-cve-2021-4034 - RHSB-2022-001 Polkit Privilege Escalation - (CVE-2021-4034)
https://access.redhat.com/security/vulnerabilities/RHSB-2022-001
ansible_security-rhel-cve-2022-0847 - RHSB-2022-002 Dirty Pipe - kernel arbitrary file manipulation - (CVE-2022-0847)
https://access.redhat.com/security/vulnerabilities/RHSB-2022-002
ansible_security-rhel-cve-2022-3602-3786 - RHSB-2022-004 X.509 Email Address Buffer Overflow - OpenSSL
(cve-2022-3602 and cve-2022-3786)
https://access.redhat.com/security/vulnerabilities/RHSB-2022-004
ansible_security-rhel-drown-test - check the OpenSSL RPM package version for the DROWN vunerability
ansible_security-spectre-meltdown - check for Kernel Side-Channel Attacks - CVE-2017-5754 CVE-2017-5753 CVE-2017-5715
https://access.redhat.com/security/vulnerabilities/speculativeexecution
ansible_service-enable-disable-at-boot - enable / disable services to start up at boot time
ansible_service-need-restart - check if any services need restarting after library updates on RHEL and Debian Linux Families
ansible_service-rhel-check-status - check the status of a service eg stopped / running
ansible_service-start-stop-restart - start / stop / restart a service
ansible_ubuntu-security-status - Execute ubuntu-security-status / ubuntu-support-status on Ubuntu hosts
ansible_user-create-new-user - create a new user. no default password.
ansible_user-disable-user-login - disable a user login
ansible_user-htpasswd-add-user - create / add a new user to an Apache htpasswd file
ansible_user-htpasswd-remove-user - remove a user from an Apache htpasswd file
ansible_user-remove-existing-user - delete a user account
ansible_user-remove-ssh-public-key - remove a ssh public key from a user account
ansible_user-renable-user-login - renable a disabled user account
ansible_user-setup-ssh-public-key - add a ssh public key to a user accountAll command line arguments are pass through to the ansible-playbook command. eg
ansible_rpm-yum-dnf-check-update -e hosts=webservers,ted.sample.comAll of the bin/ansible_* scripts by default act on localhost. This is so one can screw up your local machine BEFORE destroying a remote host. To make the playbook act on remote hosts, use the -e hosts= command line argument to list hosts or groups of hosts as defined within your ansible hosts file. You can use a comma seperated list.
TODO: Finish this documentation......