A simple Oslo Messaging Benchmarking Tool (ombt) which can be used to measure the latency and throughput of RPC and Notification transactions. This tool has been designed expressly for generating and measuring messaging traffic in a distributed fashion.
The intent is to have a tool that can be used in different distributed configurations to get some basic insights into scalability under load.
ombt has dependencies on other python packages. These packages are listed in the 'requirements.txt' file. To install these packages, use pip with the '-r' option:
pip install -r ./requirements.txt
or use the 'extras' syntax:
pip install .[amqp1] # install from repo pip install ombt[amqp1] # install from PyPi
With ombt you can:
ombt uses 'subcommands' to run in different operational modes. Supported modes are:
To run a multi-client/server test, one would:
1) set up one or more servers using rpc-server or listener mode 2) set up one or more clients using rpc-client or notifier mode 3) run a controller to submit a test and print the results
For example let us set up an RPC call test using one RPC server and two RPC clients using the AMQP 1.0 driver and run the RPC call test. This example assumes you are running the RabbitMQ broker on the local host:
$ ombt rpc-server --daemon
$ ombt rpc-client --daemon
$ ombt rpc-client --daemon
$ ombt controller rpc-call --calls=10The test will run and print out the results. For example:
RPC call test results
2 RPC clients, 1 RPC Servers (3 total)
Aggregated RPC Client results:
------------------------------
Total Messages: 20
Test Interval: 1542827906.192293 - 1542827906.228337 (0.036044 secs)
Aggregate throughput: 554.875513 msgs/sec
Latency 20 samples (msecs): Average 3.454173 StdDev 0.346421 Min 3.052950 Max 4.543066
Latency Distribution:
[0..<1): 0
[1..<2): 0
[2..<3): 0
[3..<4): 19
[4..<5): 1
[5..<6): 0
[6..<7): 0
[7..<8): 0
[8..<9): 0
[9..<10): 0
Aggregated RPC Server results:
------------------------------
Total Messages: 20
Test Interval: 1542827906.194713 - 1542827906.227007 (0.032294 secs)
Aggregate throughput: 619.313990 msgs/sec
Latency 20 samples (msecs): Average 2.264357 StdDev 0.316320 Min 1.920938 Max 3.316164
Latency Distribution:
[0..<1): 0
[1..<2): 3
[2..<3): 16
[3..<4): 1
[4..<5): 0
[5..<6): 0
[6..<7): 0
[7..<8): 0
[8..<9): 0
[9..<10): 0The "--daemon" option causes the ombt command to run in the background once the test client has completed initialization and is ready to begin testing. This option is recommended over simply backgrounding the ombt command via job control (i.e. '&'), as it avoids the possible race between client initialization and running the controller. With "--daemon" you know it is safe to start the test once the ombt command has returned control of the terminal.
By default ombt expects the RabbitMQ broker to be running on the local host. You can override that by using the --url option:
$ ombt --url rabbit://somehost.com:5672 ...
Note: ombt commands (like rpc-call) can take arguments. These arguments must be specified in '--key=value' format. Use '--help' at any point for a description of the supported arguments:
$ ombt controller rpc-call --help usage: ombt controller rpc-call [-h] [--length LENGTH] [--calls CALLS] [--pause PAUSE]
run RPC call test
optional arguments: -h, --help show this help message and exit --length LENGTH payload size in bytes --calls CALLS number of calls to make --pause PAUSE Limit the rate of RPC calls by pausing FLOAT seconds between issuing each call
You can re-run the controller command as many times as you wish using the same test clients and servers. Each run of the controller will start a new test. When done, you can use the controller to force all servers and clients to shutdown:
$ ombt controller shutdownYou can also run servers and clients in groups where the traffic is isolated to only those members of the given group. Use the --topic argument to specify the group for the server/client. For example, here are two separate groups of listeners/notifiers: 'groupA' and 'groupB':
$ ombt --topic 'groupA' listener --daemon
$ ombt --topic 'groupA' notifier --daemon
$ ombt --topic 'groupB' listener --daemon
$ ombt --topic 'groupB' listener --daemon
$ ombt --topic 'groupB' notifier --daemon
$ ombt --topic 'groupB' notifier --daemon
$ ombt --topic 'groupB' notifier --daemon
$ ombt --topic 'groupA' controller notify --events=10
Notification test results
1 Notifiers, 1 Listeners (2 total)
Aggregated Notifier (Client) results:
------------------------------------
Total Messages: 10
Test Interval: 1542828591.948388 - 1542828591.971192 (0.022804 secs)
Aggregate throughput: 438.523723 msgs/sec
Latency 10 samples (msecs): Average 2.260280 StdDev 3.954730 Min 0.823021 Max 14.119864
Latency Distribution:
[0..<1): 7
[1..<2): 2
[2..<3): 0
[3..<4): 0
[4..<5): 0
[5..<6): 0
[6..<7): 0
[7..<8): 0
[8..<9): 0
[9..<10): 0
[10..<20): 1
[20..<30): 0
[30..<40): 0
[40..<50): 0
[50..<60): 0
[60..<70): 0
[70..<80): 0
[80..<90): 0
[90..<100): 0
Aggregated Listener (Server) results:
-------------------------------------
Total Messages: 10
Test Interval: 1542828591.963562 - 1542828591.973547 (0.009985 secs)
Aggregate throughput: 1001.505253 msgs/sec
Latency 10 samples (msecs): Average 4.353619 StdDev 3.612418 Min 2.789974 Max 15.172958
Latency Distribution:
[0..<1): 0
[1..<2): 0
[2..<3): 3
[3..<4): 6
[4..<5): 0
[5..<6): 0
[6..<7): 0
[7..<8): 0
[8..<9): 0
[9..<10): 0
[10..<20): 1
[20..<30): 0
[30..<40): 0
[40..<50): 0
[50..<60): 0
[60..<70): 0
[70..<80): 0
[80..<90): 0
[90..<100): 0
$ ombt --topic 'groupB' controller notify --events=10
Notification test results
3 Notifiers, 3 Listeners (6 total)
Aggregated Notifier (Client) results:
------------------------------------
Total Messages: 30
Test Interval: 1542830818.586133 - 1542830818.615070 (0.028937 secs)
Aggregate throughput: 1036.731344 msgs/sec
Latency 30 samples (msecs): Average 2.606336 StdDev 4.197207 Min 1.063108 Max 17.767906
Latency Distribution:
[0..<1): 0
[1..<2): 27
[2..<3): 0
[3..<4): 0
[4..<5): 0
[5..<6): 0
[6..<7): 0
[7..<8): 0
[8..<9): 0
[9..<10): 0
[10..<20): 3
[20..<30): 0
[30..<40): 0
[40..<50): 0
[50..<60): 0
[60..<70): 0
[70..<80): 0
[80..<90): 0
[90..<100): 0
Aggregated Listener (Server) results:
-------------------------------------
Total Messages: 30
Test Interval: 1542830818.601133 - 1542830818.617102 (0.015969 secs)
Aggregate throughput: 1878.663442 msgs/sec
Latency 30 samples (msecs): Average 5.304170 StdDev 3.752257 Min 2.674103 Max 18.431902
Latency Distribution:
[0..<1): 0
[1..<2): 0
[2..<3): 2
[3..<4): 11
[4..<5): 9
[5..<6): 5
[6..<7): 0
[7..<8): 0
[8..<9): 0
[9..<10): 0
[10..<20): 3
[20..<30): 0
[30..<40): 0
[40..<50): 0
[50..<60): 0
[60..<70): 0
[70..<80): 0
[80..<90): 0
[90..<100): 0
$ ombt --topic 'groupA' controller shutdown
$ ombt --topic 'groupB' controller shutdownThe ombt tool uses the message bus not only for test traffic but also for control of the servers and clients. The controller command uses RPC to orchestrate the test, invoking methods on the servers and clients to do so.
In some cases this is undesireable, for example when load testing the message bus or during fault recovery testing. If the message bus becomes unstable it will effect the proper operation of the test due to ombt reliance on the bus's operation.
For these reasons ombt allows you to use a second message bus as the control bus. No test traffic flows across this control bus nor does any control traffic flow over the message bus under test.
Use the ombt command option --control to specify the URL address of the message bus to use as the control bus. The address of the message bus under test is determined by the --url command option. For example:
$ ombt --url rabbit://localhost:5672 --control amqp://otherhost:5672 rpc-server --daemon
$ ombt --url rabbit://localhost:5672 --control amqp://otherhost:5672 rpc-client --daemonuses two separate message buses: 'localhost' as the message bus under test and 'otherhost' for control traffic. Since the controller command never sends or receives test traffic you only need to specify the --control URL for that command. By default the value of the --url option is used for both command and test traffic if the --control option is not present.
Build the docker image
docker build . -t myombt:latestUsing the previously built image (e.g with rabbit)
docker run -d --hostname my-rabbit --name myrabbit rabbitmq:3
docker run --link myrabbit:myrabbit -d -ti myombt --debug --url rabbit://myrabbit:5672 rpc-server
docker run --link myrabbit:myrabbit -d -ti myombt --debug --url rabbit://myrabbit:5672 rpc-client
docker run --link myrabbit:myrabbit -ti myombt --debug --url rabbit://myrabbit:5672 controller rpc-call --calls 10
docker run --link myrabbit:myrabbit -ti myombt --debug --url rabbit://myrabbit:5672 controller shutdownThese notes may be out of date. You'd be better off consulting the Oslo.Messaging documentation upstream for the most up to date deployment guides.
Setting up Qpid Dispatch Router to work with the AMQP 1.0 driver requires version 0.6.1 or later of the router. To configure the router you must add the following address definitions to your qdrouterd configuration file (located by default in /etc/qpid-dispatch/qdrouterd.conf):
address {
prefix: openstack.org/om/rpc/multicast
distribution: multicast
}
address {
prefix: openstack.org/om/rpc/unicast
distribution: closest
}
address {
prefix: openstack.org/om/rpc/anycast
distribution: balanced
}
address {
prefix: openstack.org/om/notify/multicast
distribution: multicast
}
address {
prefix: openstack.org/om/notify/unicast
distribution: closest
}
address {
prefix: openstack.org/om/notify/anycast
distribution: balanced
}