The goal of this project is to make a partial JavaScript port of the TTLock Android SDK enough to make it work with the biometric locks.
This is just an SDK providing the means to communicate with the locks, it is not an app providing the full functionality of the TTLock app. If you are looking for an implementation please see ttlock-hass-integration Home Assistant Addon.
Bluetooth implementation is using @abandonware/noble but other implementations are possible by extending ScannerInterface
Feeling generous and want to support my work, here is my PayPal link.
*) It was tested on a Raspberry PI 3 running Debian and also under Home Assistant runing on an Intel NUC
The websocket binding present in @abandonware/noble was extended with a simple authentication via AES key, user and password. This adds basic suport for using a bluetooth adapter on a remote host via a simple websocket connection. The end goal will be to run an ESP32 as a gateway (development ongoing) to extend the range of the device the SDK is running on, or maybe just use it on a device that does not even have a bluetooth adapter. A sample server is implemented in tools/server.js. All examples in the SKD can be started in websocket mode by adding the following environment variables:
WEBSOCKET_DEBUG=1 - debug websocket messagesWEBSOCKET_ENABLE=1 - this will enable websocket supportWEBSOCKET_HOST=127.0.0.1 - the IP or hostname of the host running the serverWEBSOCKET_PORT=2846 - the port the server is running onFor example:
pi@raspberrypi:~/ttlock-sdk-js $ WEBSOCKET_ENABLE=1 WEBSOCKET_HOST=192.168.1.42 npm run get-cardsTTLOCK_IGNORE_CRC=1 - Ignore CRC error on messages received from the lockTTLOCK_DEBUG_COMM=1 - Log raw lock communication messages npm i.The code for the followinng examples are located in the examples folder.
npm run init - performs the initial pairing with the lock.
The lock needs to be reset to factory defaults and it needs to be woke up by touching the keyboard. The lock stays alive for 10-15s and only in that interval it is discoverable so you need to time this right.
If the lock is woke up after the scan has started it won't be found.
If the lock is woke up too early, it can go back to sleep before the init process is completed.
The init script provides a countdown of 10 seconds, waking up the lock 5 seconds before the scan start proved to be most reliable.
After the initialisation is completed, the script ouputs the credentials for the lock into the lockData.json file. This file is used by the other scripts.
Sometimes the pairing process fails for reasons that are not quite clear. The pairing process has to be repeated until it succedes. Possible causes of failure are:
In case the lock needs to be reseted to factory defaults, there is a switch on the back of the part that goes on the outside. Removing the metal cover will reveal this switch. Short pressing the switch will reboot the lock (one beep), long pressing for about 2-3 seconds will reset the lock to factory defaults (two beeps).
npm run unlock - unlock the lock
npm run lock - lock the lock
Those 2 scripts read the lock credentials from lockData.json file generated by the init script, start searching for the lock and connect to it. Once the known lock is found and connected they perform the lock/unlock command.
Bu default, auto locking is set for 5 seconds. So after unlocking, it will auto lock back.
npm run status - returns the lock or unlock status
Passage mode disables autolock for the intervals you set. All unlock metods are now treated as toggle (lock/unlock) instead of just unlock and locking back after the autolock timeout.
npm run set-passage - sets passage mode for friday all day
npm run get-passage - gets the passage mode intervals
npm run delete-passage - deletes the passage mode for friday all day
npm run clear-passage - deletes all passage mode intervals
npm run reset - resets the lock to factory defaults
Performs a soft reset of the lock to factory data. The credentials file lockData.json is automatically updated and the reseted lock is removed.
Passcodes or keyboard passcodes or pin codes allow oppening the lock using a 4-8 digits code. The passcodes can be permanent, one time, or limited time.
npm run add-passcode - sets a permanent passcode 123456 available all the time
npm run update-passcode - updates the permanent passcode 123456 to 654321
npm run delete-passcode - deletes the permanent passcode 654321
npm run clear-passcodes - removes all passcodes
IC cards are scanned and their serial number is returned. You can then add validity intervals for that card serial number. Also works with credit cards.
npm run add-card - scans a card and adds a permanent validity
npm run get-cards - lists all the valid cards and their intervals
npm run clear-cards - removes all registered cards
Fingerprints are scanned mutiple times during the add process. After scanning you can add validity intervals for that fingerprint.
npm run add-fingerprint - scans a fingerprint and adds a permanent validity (it will timeout after 8.5 seconds if you do not scan a finger)
npm run get-fingerprints - lists all valid fingerprints and their intervals
npm run clear-fingerprints - removes all registered fingerprints
Disable the anoying beeps.
npm run delete-locksound
Get the log of operations from the lock (lock, unlock, add/edit/remove credentials etc.).
npm run get-operations
Detecting lock/unlock events is possible by using a passive scan and monitoring changes in params byte of the advertising data.
0000 0000
|||| ||||__ ( 1) isUnlock
|||| |||___ ( 2) new operation log events
|||| ||____ ( 4) isSettingMode
|||| |_____ ( 8) isTouch
||||_______ ( 16) parkStatus
|||________ ( 32)
||_________ ( 64)
|__________ (128) This will tell us when new operation logs are available which we can fetch to (hopefully) figure out what happend. Unfortunatelly auto-lock events are not recorded in this log, so a combination of 'new operation' bit detection together with isUnlock bit has to be used. Also, because advertising packets are sent whenever the lock wants to send them, change detection is not realtime (still, within a maximum of 10s interval).
npm run listen