search

korsunav / mikrotik-wireguard-vless

Selective URL redirection via VLESS in the network on Mikrotik without the ability to use containers
8 stars 3 forks source link

readme

Mikrotik -> WireGuard -> VLESS

Selective URL redirection via VLESS on Mikrotik without container support.

Network Diagram

Requirements

Setup within Your Intranet

1. Create a Virtual Machine with V2rayA and WireGuard

1.1. Deploy the VM on Linux

For this guide, Oracle Linux 9 will be used. Please turn off SELinux and Firewalld during setup, it will probably save your time.

1.2. Install Docker

Follow this guide to install Docker: Docker Installation Guide for RHEL.

1.3. Run the V2rayA Container using Docker Compose

v2raya_docker-compose.yaml ```yaml services: v2raya: restart: always privileged: true network_mode: host container_name: v2raya environment: - V2RAYA_V2RAY_BIN=/usr/local/bin/xray - V2RAYA_LOG_FILE=/tmp/v2raya.log - V2RAYA_NFTABLES_SUPPORT=off - IPTABLES_MODE=legacy - V2RAYA_VERBOSE=true volumes: - '/etc/v2raya:/etc/v2raya' - '/etc/resolv.conf:/etc/resolv.conf' - '/lib/modules:/lib/modules:ro' image: 'mzz2017/v2raya:latest' ```

1.4. Run the wg-easy Container using Docker Compose

wg-easy_docker-compose.yaml ```yaml volumes: etc_wireguard: services: wg-easy: environment: # Change Language: # (Supports: en, ua, ru, tr, no, pl, fr, de, ca, es, ko, vi, nl, is, pt, chs, cht, it, th, hi) - LANG=en # ⚠️ Required: # Change this to your host's public address - WG_HOST=192.168.88.112 # Optional: # - PASSWORD_HASH=$$2y$$10$$hBCoykrB95WSzuV4fafBzOHWKu9sbyVa34GJr8VV5R/pIelfEMYyG (needs double $$, hash of 'foobar123'; see "How_to_generate_an_bcrypt_hash.md" for generate the hash) # - PORT=51821 # - WG_PORT=51820 # - WG_CONFIG_PORT=92820 # - WG_DEFAULT_ADDRESS=10.8.0.x # - WG_DEFAULT_DNS=1.1.1.1 # - WG_MTU=1420 # - WG_ALLOWED_IPS=192.168.88.0/24, 10.0.8.0/24 # - WG_PERSISTENT_KEEPALIVE=25 # - WG_PRE_UP=echo "Pre Up" > /etc/wireguard/pre-up.txt # - WG_POST_UP=echo "Post Up" > /etc/wireguard/post-up.txt # - WG_PRE_DOWN=echo "Pre Down" > /etc/wireguard/pre-down.txt # - WG_POST_DOWN=echo "Post Down" > /etc/wireguard/post-down.txt # - UI_TRAFFIC_STATS=true # - UI_CHART_TYPE=0 # (0 Charts disabled, 1 # Line chart, 2 # Area chart, 3 # Bar chart) image: ghcr.io/wg-easy/wg-easy container_name: wg-easy volumes: - etc_wireguard:/etc/wireguard ports: - "51820:51820/udp" - "51821:51821/tcp" restart: unless-stopped cap_add: - NET_ADMIN - SYS_MODULE # - NET_RAW # ⚠️ Uncomment if using Podman sysctls: - net.ipv4.ip_forward=1 - net.ipv4.conf.all.src_valid_mark=1 ```

2. Configure V2rayA

  1. Go to <Your VM IP address>:2017.
  2. Import the configuration from 3X-UI and start the proxy.
  3. In the settings, configure the following options:
    • Transparent Proxy/System Proxy: On, do not split traffic.
    • IP Forward: Active.
    • Port Sharing: Active.
    • Transparent Proxy/System Proxy Implementation: Redirect.
    • Traffic Splitting Mode of Rule Port: RoutingA.
      • Click Configure and keep only one rule: default: proxy.
    • Leave everything else as default.
  4. Click Save and Apply.

3. Configure WireGuard

  1. Go to <Your VM IP address>:51821.
  2. Click + New, input a name, and click Create.
  3. Download the configuration file for the created connection.

4. Configure Mikrotik

  1. Upgrade RouterOS to firmware version 7.5+ (the latest stable version is preferred).

  2. Click the WireGuard button.

  3. Click WG Import and select the downloaded configuration file from WireGuard.

  4. Go to the Peers section and double-click the newly added connection. Enter <Your VM IP address> in Endpoint and 51820 in Endpoint port.

  5. Create a NAT rule for the VPN interface via the terminal:

    /ip firewall nat add action=masquerade chain=srcnat out-interface=wg0

  6. Add a new WireGuard address to the address list:

    /ip address add address=<Your client WG IP with CIDR> interface=<Your WG interface> network=<Your WG network>

    Example:

    /ip address add address=10.8.0.2/24 interface=wg0 network=10.8.0.0

  7. Add domains to the Address list:

    1. Create a routing table:

      /routing table add disabled=no fib name=to-proxy

    2. Add a route:

      /ip route add comment=vpn disabled=no distance=1 dst-address=0.0.0.0/0 gateway=wg0 pref-src="https://github.com/korsunav/mikrotik-wireguard-vless/raw/main/" routing-table=to-proxy

    3. Create a marking rule:

      /ip firewall mangle add action=mark-routing chain=prerouting disabled=no dst-address-list=vpn-domains new-routing-mark=to-proxy passthrough=yes

    4. Add necessary domains to the DNS static list for forwarding through the proxy:

      • One by one:

        /ip dns static add name=terraform.io type=FWD forward-to=8.8.8.8 address-list=vpn-domains match-subdomain=yes

      • Or generate commands from a domain list:

        wget -qO- https://raw.githubusercontent.com/itdoginfo/allow-domains/main/Russia/inside-raw.lst | sed "s/.*/\/ip dns static add name=& type=FWD forward-to=8.8.8.8 address-list=vpn-domains match-subdomain=yes/"

        And paste them all into the terminal.

That's all!