Board support crate for the Watchy programmable smartwatch.
This is still a work in progress.
Complete:
Incomplete:
Currently, this only supports v2.0 of the board, and only uses the IDF version of the ESP crates. If there is interest, older board versions and the alternative bare-metal ESP crates could be added as features.
To use this crate, follow the instructions in The Rust on ESP Book to setup the build environment and create a binary crate project.
Note that the standard ESP-IDF crates (viz. esp-idf-hal, esp-idf-sys, and esp-idf-svc) are re-exported from this crate with their features exposed.
A binary crate will still need to include esp-idf-sys as a direct dependency.
In order to release this crate on crates.io, all dependencies must also be released there.
However, there are currently a couple of issues that require dependencies to be patched to git repositories:
gdeh0154d67 display driver crate relies on bitvec, which currently has an unreleased version issue, with the latest released version not compiling.
It seems that the author currently has some big things going on in his life that are consuming his attention at the moment.
As a result, the bitvec dependency must be patched to the latest version on GitHub.gdeh0154d67 crate that have not yet found their way onto crates.io, so this must be patched to my GitLab fork.
I am holding off on a pull request to make this happen until issue 1 above is resolved.I will try to monitor these issues so that this can be released on crates.io once they are resolved.
Contributions and API suggestions are welcome.
License: MIT