FCC and DPR unlock for Lenovo PCs
Instructions to perform FCC unlock and SAR config:
List of Supported WWAN Modules and Systems:
1) WWAN module : Fibocom L860R+
Supported systems:
2) WWAN module : Fibocom FM350 5G
Supported systems:
3) WWAN module : Quectel RM520N-GL (*Please refer below required Environment) Supported systems:
ThinkPad T14s Gen 6 (AMD)
Environment:(Enabled only for non-USA SIM)
4) WWAN module : Quectel EM160R-GL (*Please refer below required Environment) Supported systems:
ThinkPad T14 Gen 5 (Intel/AMD)
Environment:(Enabled only for non-USA SIM)
5) WWAN module : Quectel EM061K (*Please refer below required Environment) Supported systems:
ThinkPad T14s Gen 5 (Intel)
Environment:(Enabled only for non-USA SIM)
6) WWAN module : Quectel EM05-CN (*Please refer below required Environment) Supported systems:
ThinkPad T14 Gen 5 (Intel)
Environment:
Enablement is done on a Module + System basis. Systems not listed are currently not supported.
Tested Operating Systems:
Please follow the procedure below step by step to enable WWAN
1) Run the fcc_unlock_setup.sh
script to
install SAR config package and FCC unlock:
chmod ugo+x fcc_unlock_setup.sh
./fcc_unlock_setup.sh
2) Reboot machine (Only needed once)
Please follow the procedure for uninstalling this package
1) Run the fcc_unlock_uninstall.sh
script to
uninstall SAR config package and FCC unlock:
chmod ugo+x fcc_unlock_uninstall.sh
./fcc_unlock_uninstall.sh
Logs can be checked using one of the commands below:
cat /var/log/syslog | grep -i DPR_Fcc_unlock_service
cat /var/log/syslog | grep -i configservice_lenovo
journalctl
Please follow below steps to enable Verbose logging: 1) For FCC Unlock: Add "-v" in FCC unlock scripts updated in "fcc-unlock.d.tar.gz", for example:
FileName - fcc-unlock.d/8086:7560
Modification- "./opt/fcc_lenovo/DPR_Fcc_unlock_service -v"
2) For SAR Config: Add "-v" in systemd service file, for example:
FileName - lenovo-cfgservice.service
Modification- "ExecStart=/opt/fcc_lenovo/configservice_lenovo -v"
Additional Notes:
systemctl restart ModemManager
command.WWAN enablement is done for USA SIM except for Verizon SIM, used in below module: