FindMyGUI

Query Apples FindMy Network without a Mac. This application is a web server that can be used from a browser.

This based on various great projects on github:

https://github.com/biemster/FindMy https://github.com/seemoo-lab/openhaystack/ https://github.com/JJTech0130/pypush

For map display OpenStreetMap (https://openstreetmap.org) and leaflet.js (https://leafletjs.com) is used.

Screenshot

Update April 2024

The new version available since end of March 2024 contains a substantial update. It supports MQTT to interact with local BLE scanners:

https://github.com/liebrandapps/DIYAirTagSniffer

Firmwares transmitting the battery level in the status byte are also supported. The battery battery level is displayed as icon.

https://github.com/dakhnod/FakeTag

My own version for such a firmware is not yet ready for publication. I am working on it.

Initial Setup and Configuration

You need two projects from github:

git clone https://github.com/liebrandapps/FindMyGUI
git clone https://github.com/Dadoum/anisette-v3-server

Build the anisette-server and get it working (it basically must be running in order to make this app functional)

For this project, you need python 3 and some dependencies:

pip3 install -r ./requirements.txt

Disclaimer

Use this application at your own risk! Use this application with care especially to avoid blocking of your Apple Id. Read the Safety part of this file to understand the unencrypted transmission of data. No guarantee that this application works at all times and is fit for a certain purpose.

Links were valid at time of writing this readme. I am not taking any responsible for the linked content.

Configuration

For all configuration settings default values are defined in main.py. In case you need to configure something different, you need to create an ini file at the project root level. The file is called 'findMyGUI.ini' and has the standard ini file format.

In case your anisette server is not on the same host as this server or does not run on port 6969, you need to specify the values

[general]
anisetteHost=http://your_ip_here
anisettePort=your_port_number_here

In case you want to configure the Apple Id in the configuration file:

[appleId]
appleId=Your Apple Id
password=Your password
trustedDevice=True -> to be prompted on your Apple Device, False -> 2nd factor as SMS

Safety

NEVER RUN THIS SERVER IN AN UNSAFE ENVIRONMENT:

Retrieval of the location data requires the use of an Apple Id and its password. Depending on how the ID is set up, you may be required to enter a 2nd factor. You can configure your Apple Id credentials in the ini file on the server. If you decide to not do this (which is perfectly valid), you are asked upon retrieval of the location data in the browser.

Be aware that the data is transferred without encryption.

2nd Factor (never reaching you)

Most Apple Ids are configured to use a 2nd factor. The web front end prompts you to enter the 2nd factor value received in the browser. By default, the app is configured to request the 2nd factor via SMS. If your Apple Id is configured to receive those codes via your devices then sms may not work (and the code never arrives). If this is the case try to set 'trustedDevice' in section [appleId] of the 'findMyGUI.ini' to True.

Usage

The server runs on port 8008:

http://your_server_ip:8008

Use your (no longer functional with Mac 14) Openhaystack App to get the keys:

In the Web App: click "+"
Enter a friendly name for your tag
From the OpenHayStack App right click the corresponding tag and copy the private key ("Copy private key B64")
Paste this into the Web App private key field
From the OpenHayStack App right click the corresponding tag and copy the advertisement key in B64 format ("Copy advertisement key > Base64)
Paste this into the Web App advertisement key field
Press "Save"
Press "Update location data" to get the last known location of the tag.

Mac OS (M1) Installation

pip3 install pycryptodome==3.11.0 --no-cache-dir --verbose --force-reinstall

Using local BLE Scanners

Tracking can be expanded to local BLE scanners. This might be useful for indoor locating.

Feature has not been tested extensively, feedback welcome

You will need hardware supporting Bluetooth Low Energy (e.g. a Raspberry) and the code from this project:

https://github.com/liebrandapps/DIYAirTagSniffer

plus a working MQTT Server (below briefly the required commands):

apt install mosquitto
mosquitto_passwd -b /etc/mosquitto/pwfile <user> <password>
service mosquitto restart

Create users for the sniffer app and the server. Configure these in the ini files.

What it does

Below a diagram showing the communication of the components.