This is a sample layer/distro for OpenEmbedded to recreate the optee development and test environments. The primary development environment for optee is described in its documentation. Although made for development, this OE tree is not supported.
Some goals and non-goals
This git project contains its dependents as submodules. This makes setup quite a bit easier, even though it really isn't how OE is intended to be used. As such, the layer configuration is a little strange (including ".." in many of the path components). There is also a different init script, since the base OE init script assumes a specific directory layout that is incompatible with git submodules.
Most of the additions are new recipes for bitbake. These are all under the meta-optee directory. They include a specialized kernel, and the various secure bootloaders necessary.
Everything is packaged up with the 'optee-image' package. This same package can be used on any of these targets to build the image(s) necessary for that target. There are a handful of shell scripts at the top-level directory to make running the images a bit easier.
Currently, oe-optee supports the following targets.
qemu-optee32: Builds everything as 32-bit, and builds an image suitable to run within Qemu. This target is fully self-contained and is the easiest to use (bitbake will build qemu for you). Unfortunately, it is currently only 32-bit.
fvp-optee64: Builds a full 64-bit system, and builds an image suitable to run within ARM's Foundation Platform emulator. This emulator is freely available, but requires acceptance of a click-through license. Bitbake will build everything needed to run on this platform, and you will only need to download the Foundation Platform manually.
hikey-optee64: Builds a full 64-bit system, and builds an image suitable to run on the Hikey 96board. This build is not complete, and you should use one of the 96board reference images to initially flash your device (it will work with either a Debian or Android system). Since it runs entirely in a ramdisk, the data partitions are not affected, and it is easy to switch back and forth.
OE has very few system requirements, generally you'll need cpio and texinfo. It will print early on any packages that are missing. Most of everything else that it needs will be downloaded and built.
To build this image, you'll need about 15-20 GB of space. If you disable 'rm-work' to leave build trees expanded, you'll need a lot more.
The first time you build, it will take a while, as OE builds all of the necessary toolchains itself. Once this is built, as long as you keep the build/sstate-cache directory, subsequent builds will only rebuild things that haven't been built (or have changed).
$ cd path/to/workdir
$ git clone https://github.com/linaro-swg/oe-opteeDownload the dependencies, including the bitbake build tool that is at the heart of OpenEmbedded. These are submodules so can easily be downloaded.
$ cd oe-optee
$ git submodule update --init$ source ./optee-init-build-envThis should print a message out about setting up a default config. It
will, by default, create a directory called build and cd you to this
directory. Feel free to look at conf/local.conf in this build
directory. Most notably, at the end are some lines that can be
uncommented to add things such as ssh, gdb and strace to the image.
This can also be done later, and the image quickly regenerated. A
section below describes these in more detail.
This init script also accepts an argument of a directory to use instead of 'build'. This is useful to be able to build for more than one target, provided you have sufficient space.
Ask OE to build our optee-image:
$ bitbake optee-imageOn my dev machine, this takes about 45 minutes the first time. Later builds will be much faster as intermediate results will be cached.
You will need two other terminal windows to run the serial consoles
used by qemu. In one, run ./term.sh, and in the other, run
./term2.sh. You can then run ./runarm.sh (note you have to be
outside of the build directory to run this, and it is hardcoded for
the location of the build directory.
Entering c and return in at the qemu prompt should start booting the
linux kernel on the first terminal window. To test optee, do
something along the lines of:
login: root
# xtestNote that the tee-supplicant will be started automatically by an init script.
In addition to the QEMU 32-bit target, you can also build a 64-bit target that runs on ARM's FVP emulator. Which target builds is determined by the MACHINE variable in build/conf/local.conf. Set this to "fvp-optee64" to build the FVP 64-bit target.
You will need to get the emulator yourself (ARM requires an acceptance to download, but otherwise does not charge for this emulator). The runfvp.sh script assumes the emulator is extracted under Foundation_Platformpkg, but this can be changed by editing this script. The script also assumes a different build directory (so that both platforms can be built at the same time).
Run the runfvp.sh script, which will fire up two xterms for the two consoles, and a small monitor window to show the status of the emulator itself.
The hikey target can be built by uncommenting the "hikey-optee64" MACHINE definition line. There is a flash-hikey.sh script in the top directory which will use a (previously installed) fastboot command to flash the images this package creates. If your board is not currently running an image (either Android or Debian should be fine), follow the instructions at http://96boards.org/ to flash an initial system.
The Yocto Project has a lot of good documentation about using OpenEmbedded. Here are a few hints.
The file build/conf/local.conf has some useful settings. The line
INHERIT += "rm_work"saves a lot of disk space by deleting the build directories after each build. You can comment this line out to leave some of this data.
There are configuration lines at the end to enable ssh, strace, and even gdb.
The build images land in build/tmp-glibc/deploy/images/qemu-optee32.
For example, in addition to the combined "bios" image, the kernel, and
various formats of the root filesystem end up here.
If you make changes to the config file (or any recipes), simply run
bitbake optee-image to regenerate this image again.
(TODO: Write a bit more here) gdb runs directly on the target, but doesn't have source or debug symbols. It seems that the optee packages aren't generating proper debug packages.
Gdb can also be used remotely, use:
$ bitbake gdb-cross
$ tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi/arm-oe-linux-gnueabi-gdb \
tmp-glibc/sysroots/qemu-optee32/usr/bin/exename
(gdb) target remote localhost:2159You can also run the gdb server:
# gdbserver tcp:2159 path/to/exeand then use gdb on the host. You
OE has a useful development script called devtool which is useful
for using your own source tree instead of it fetching and building
itself.
For example, if you wanted to work on optee-test (the recipe name, not the repo name), you would do:
$ devtool modify -x optee-test optee-testWhere the first 'optee-test' is the recipe name, and the second is a local directory to clone the git repo into. This tool will create a '.bbappend' file under 'workspace' to tell bitbake to build from your source tree, rather than getting the source itself.
You can do this for as many recipes as you'd like. However, keep in mind that recipes like this will end up always being built, since it doesn't know if you have changed something. To have OE stop using your source, and go back to the original:
$ devtool reset optee-testThis will leave the source directory in place, but remote the bbappend file. Rerun the above 'modify' command, but without the '-x' to start using your source directory again for builds.