Open dnwk opened 3 years ago
I'm going through the same problem. Did you have any solution? Thanks
It's a long time ago I used it ... Did you try the blinking example and did it work? I remember I was facing GPS issues indoors, where I did not have good GPS signals. Maybe try somewhere where you can be sure to have good GPS signals available.
I2C device found at address 0x34 ! axp192 PMU found I2C device found at address 0x3C ! done
AXP192 Begin PASS DCDC1: ENABLE DCDC2: ENABLE LDO2: ENABLE LDO3: ENABLE DCDC3: ENABLE Exten: ENABLE Positioning(0) Positioning(1) Positioning(2) Positioning(3)
After these serial output, I start to get "No GPS detected". Is it an indication of GPS not fixed yet or it has trouble locating the GPS output?
Thanks