TTGO T-Beam GPS example
Flash it to your board using Arduino IDE (see my TTGO-T-Beam-Blinking example for details).
Connect to via serial console to your board, e.g. on mac you can use screen:
TERM=xterm screen -L -h 5000 /dev/tty.SLAB_USBtoUART 115200
Maybe you have to replace the tty device name in case your's is different.
Until a proper GPS signal is found you will see "Positioning" message with an increasing counter:
Positioning(1)
Positioning(2)
Positioning(3)
Positioning(4)
...
as soon as a valid GPS signal is available it will change to display the coordinates:
UTC:17:1:55
LNG:-73.9837
LAT:40.7405
satellites:4
...
UTC:17:2:20
LNG:-73.9893
LAT:40.7419
satellites:6
...