NOTE: We have deprecated python-blessclient and it is no longer actively maintained. A recommended alternative is blessclient in Go.
A client for interacting with BLESS services from users' laptops. Blessclient optimizes to ensure that users can always use ssh as they normally would with a fixed key, with minimal delay.
Netflix's BLESS was designed to issue short-lived certificates to users after they logged into a bastion service, that would be used to authenticate the user to other hosts within the cluster. Lyft wanted to use ephemeral ssh certificates for our users too, but wanted to issue these certificates directly to users' laptops, instead of on the bastion. We were able to accomplish this by making a few modifications to Netflix's BLESS and deploying this project, blessclient, to our users' laptops. Doing this allowed Lyft to improve security by extending the existing multi-factor authentication (MFA) setup that we had with AWS to SSH, as well as simplifying our provisioning and deprovisioning process.
Blessclient is a python client that should run without modification on OSX 10.10 - 10.12, and Ubuntu 16.04. Other linux versions should work fine, but we test the client on 16.04.
Users should be running a recent version of python 2.7 (OSX comes with 2.7.10), and need pip and virtualenv installed if they will be building the client locally. We distribute blessclient with a Makefile, but you can easily duplicate those steps in another scripting language if your users don't have make installed.
It's required that your AWS user names match the ssh username used by your users. The ssh certificate issued by the BLESS Lambda specifies the username allowed the login with the certificate, and we use the user's AWS username for this. The BLESS Lambda and kmsauth could be modified to change this requirement, but we don't support that at this time.
To get to the point where you can login to a server using your bless'ed SSH certificate, you will need:
Run Netflix's BLESS in your AWS account.
The lambda execution role will need permissions to decrypt the CA private key in your configuration, as well as permission to decrypt kmsauth tokens (see below).
Blessclient also assumes that the user will assume an IAM role, and that role has permissions to execute the Lambda. You should create this role, give it permissions to execute the Lambda, and give your users permissions to assume the role. The kmsauth policy can be used to require MFA, however you may want to also require MFA to assume this role, in case the kmsauth control fails.
Kmsauth is a system where we use an AWS KMS key and AWS IAM policy to get proof that a particular user proved their identity to AWS at a specific time. For more context around kmsauth, see the announcement for Confidant, Lyft's secret management system.
To use kmsauth with blessclient,
1) Add a kms key in each region where you want to be able to use kmsauth.
2) Add a policy for your users to use the key that looks something like,
{
"Action": "kms:Encrypt",
"Effect": "Allow",
"Resource": [
"arn:aws:kms:us-east-1:123456789011:key/12345678-abab-cdcd-efef-123456789011",
],
"Condition": {
"StringEquals": {
"kms:EncryptionContext:to": [
"bless-production",
],
"kms:EncryptionContext:user_type": "user",
"kms:EncryptionContext:from": "${aws:username}"
},
"Bool": {
"aws:MultiFactorAuthPresent": "true"
}
}
}This allows your users to encrypt data with the kms auth key only if the "from" context matches their username. Your lambda's execution role will need a corresponding permission to decrypt data using this same kms key when the "to" context matches the the service name (in this example, "bless-production").
Your sshd_config should have a TrustedUserCAKeys option setup to trust your BLESS Lambda. See the Netflix BLESS documentation for how to do this.
At minimum, you can run make client to setup a virtualenv, install python-blessclient, and symlink to the resulting script. This requires users to have virtualenv and pip installed (and have reasonably recent versions of both).
By default, blessclient uses the private key ~/.ssh/blessid, and looks for a corresponding ~/.ssh/blessid.pub to get the public key. The key must be an RSA key to use the Lyft/Netflix BLESS Lambda, other key types are not supported. The ssh certificate will be written to
You can generate these with something like,
ssh-keygen -f ~/.ssh/blessid -b 4096 -t rsa -C 'Temporary key for BLESS certificate' -N ''
ssh-keygen -y -f ~/.ssh/blessid > ~/.ssh/blessid.pub
touch ~/.ssh/blessid-cert.pub
ln -s ~/.ssh/blessid-cert.pub ~/.ssh/blessid-certYou can use an alternate filename by setting the BLESS_IDENTITYFILE environment variable. Blessclient will also attempt to detect and use as the identity file a '-i' flag passed into the ssh command.
Blessclient will also use your user's AWS credentials to take actions in AWS on their behalf. These are typically set in ~/.aws/credentials, or by some other method (see Configuring Credentials).
By default, blessclient is configured by adding a blessclient.cfg file in the root of the directory where you downloaded blessclient. You can also specify a config file location by passing --config when invoking blessclient.
If you fork this project, you can include a configuration file in the fork for your users to download when they clone the repo, or you can add this repo as a git submodule to a deployment repo, and have the installation process copy your configuration file to the correct location.
You will probably want to start with the sample config (blessclient.cfg.sample) and fill in the information about your BLESS Lambda, kmsauth key, and blessclient. At minimum, you will likely need to set, kms_service_name, bastion_ips, domain_regex, user_role, account_id, functionname, and functionversion for things to work.
Blessclient will need to be called shortly before your users can ssh into BLESS-configured servers. There are a couple of ways you can accomplish this. To ensure blessclient is always invoked for the most users, Lyft uses both methods, preventing a redundant second run with BLESS_COMPLETE.
Wrap your ssh command with an alias that calls blessclient first. At Lyft, we alias ssh to a bash script that looks like,
#!/bin/bash
CLIENTDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
# Only run blessclient if connect to a lyft server
if echo "$@" | grep -q '\.lyft\.'; then
echo 'Running bless...'
"${CLIENTDIR}/blessclient.run"
fi
unalias ssh &> /dev/null
BLESS_COMPLETE=1 ssh "$@"This is nice because the user can interact with blessclient and put their MFA code (if needed) into the shell prompt.
Add a Match exec line to your ssh_config file. You can add something like,
Match exec "env | grep -q BLESS_COMPLETE || /Users/stype/blessclient/blessclient.run --gui --host '%h'"
IdentityFile ~/.ssh/blessidThe advantage of this method is that all uses of ssh (git, scp, rsync) will invoke blessclient when run. The down side is that when openssh client runs the command specified, it connects stderr but not stdin. As a result, blessclient can't prompt the user for their MFA code on the console, so we have to pass --gui to present a gui dialog (using tkinter). Also, 'Match exec' was added in openssh 6.5, so earlier clients will error on the syntax.
When your users run blessclient, the rough list of things done is:
Blessclient aggressively caches artifacts, and can issue a certificate with a single round-trip to call the Lambda if a current kmsauth token and role credentials are cached.
After you've taken the time to get all of your users to install blessclient, it's useful to ensure that your users automatically update their copy of client. If you don't want to do this via a traditional endpoint management system, blessclient can be setup to run an update script automatically after 7 days of use. The update script is configurable in blessclient.cfg ('update_script' in the CLIENT section). The update script does not block the client's execution (we don't want to make users wait for a client update if they are responding to an emergency). The script could be as simple as git pull && make client. At Lyft, the update process verifies that the update target (in our deployment repo) is signed by a trusted GPG key.
This project is governed by Lyft's code of conduct. For your PR's to be accepted, you'll need to sign our CLA.
To setup your development environment, run make develop to install the development python dependencies from pip. Test your work with make test. All new contributions should have 100% (or very close) test coverage.