search

makerbase-mks / MKS-Monster8

MKS Monster8 is an 8-axis motherboard, which supports Voron printers and can run Marlin and Klipper firmware.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
GNU General Public License v3.0
109 stars 64 forks source link

CANbus usage ... #12

Open themacboy opened 2 years ago

themacboy commented 2 years ago

It is possible to connect a expansion board like FLY SHT36 board in the Monster8 CANbus port and control this expansion board?

If possible, Can you give a few instructions about how to do it?

Thx in advance !

710920772 commented 2 years ago

hello, you can use MKS USB to Can, And using Usb to connect the board.

tungyao commented 2 years ago

  1. main board need to select USB to CAN bus bridge on communication interface optioin

  2. SHT board select CAN bus option

  3. image

  4. IMPORTANT If cannot connect the main board , try to manually set baud rate ip link set can0 up type can bitrate 500000