MKS-Monster8
Where to buy it?
Monster8 V1 on Aliexpress
Monster8 V2 on Aliexpress
Hardware
- MCU is STM32F407VET6, 168MHz, 512K flash, 192KB RAM
- DC12-24V input(2 MP1584EN Output DC12V(For FANs) and DC5V)
- 4 heaters + 4 temps interface(H-BED,HE0,HE1,HE2; TB, TH0,TH1,TH2)
- 3 PWM FANs + 3 power output(all power can be select by jumper and select VIN, dc12V, dc5V)
- 8 axis drivers and 9 motor interface(Driver0,1,2-1,2-2,3,4,5,6,7)
- EXP1,EXP2 support MKS MINI12864,MKS TS35,LCD12864,LCD2004
- USART(usart1:PA9,PA10) support MKS H43 or for other serial communication
- 6 endstop support power select(X-,X+,Y-,Y+,Z-,Z+) and 3D TOUCH(PA8) interface
- 4K eeprom on board(connect to I2C)
- Built-in CAN transceiver and interface(connect to CAN)
- Integrated SPI communication microsd card and reserved SPI signal interface
- Integrated UDISK
- Integrated virtural USB device
- Support TMC UART and SPI mode, SENSORLESS_HOMING function(Diag0-5,connect to X-,Y-,Z-,X+,Y+,Z+)
- Support driver power select(5V or 3.3V)
- Has TVS power spike protection
- Possess power reverse connection protection function
- Support DFU mode set by button(Boot0)
Firmware
- Support Marlin 2.0.x
- Support Klipper
- Update firmware
- DFU upload
- TF card update
- Udisk update
STL files for MKS Monster8 and mini12864 V3.0
You can download from Github or from Thinkiverse-MKS Monster8,Thinkiverse-MKS Mini12864 V3.0
Related tutorials and Notice
Note
![mks_link](https://user-images.githubusercontent.com/12979070/149611624-5dee1722-9d35-4636-b23b-3d306bc16d5a.png)