search

makerbase-mks / MKS-Monster8

MKS Monster8 is an 8-axis motherboard, which supports Voron printers and can run Marlin and Klipper firmware.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
GNU General Public License v3.0
103 stars 62 forks source link

MKS Monster8 V2.0_003 SCH.pdf Pinout clarification - correction for Driver4/E0 and Driver7/E5 Enable. #13

Closed LoganFraser closed 2 years ago

LoganFraser commented 2 years ago

On the schematic, Driver4/E0 and Driver7/E4 both share PD7, labeled E0-4_EN. On the pinout, Driver4/E0 uses PD7 and Driver7/E4 uses PD14. Which is correct? Can you please correct either the schematic or the pinout to reflect the actual enable pin used? Thank you.

LoganFraser commented 2 years ago

I must have been on the wrong pinout, my fault. They appear aligned at second view.