search

makerbase-mks / MKS-Monster8

MKS Monster8 is an 8-axis motherboard, which supports Voron printers and can run Marlin and Klipper firmware.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
GNU General Public License v3.0
109 stars 64 forks source link

RRF port support? #3

Open whoim2 opened 2 years ago

whoim2 commented 2 years ago

Goid board with good mcu, but im not find RRF firmware for this

mks-viva commented 2 years ago

RRF is not currently supported, the main reason is that the memory of 407VET6 is only 512Kb

whoim2 commented 2 years ago

RRF is not currently supported, the main reason is that the memory of 407VET6 is only 512Kb

fysets adding rrf in f446, 512k flash, see https://github.com/FYSETC/FYSETC-SPIDER/tree/main/firmware/RRF

mks-viva commented 2 years ago

MKS Monster8 bootloader is 48kb and firmware start address offset is C000, takes up a lot of space.

ShopingLee commented 2 years ago

will it support rrf in the future, or never?