Attempt to describe the Xiaomi Robot Vacuum Protocol.
These commands are send using the Xiaomi mi-home protocol. (For decoding of the vacuum map see RR Map File)
Applications implementing this protocol:
Supported vacuum devices:
| Model | Name / aliases |
|---|---|
| rockrobo.vacuum.v1 | Mi Robot Vacuum |
| roborock.vacuum.a01 | Roborock E Series |
| roborock.vacuum.a08 | Roborock S6 Pure |
| roborock.vacuum.a09 | Roborock T7 Pro |
| roborock.vacuum.a10 | Roborock S6 MaxV |
| roborock.vacuum.a11 | Roborock T7 |
| roborock.vacuum.a14 | Roborock T7S |
| roborock.vacuum.a15 | Roborock S7 |
| roborock.vacuum.a19 | Roborock S4 Max |
| roborock.vacuum.a23 | Roborock T7S Plus |
| roborock.vacuum.c1 | Xiaowa C1 |
| roborock.vacuum.e2 | Roborock Xiaowa E Series |
| roborock.vacuum.m1s | Mi Robot Vacuum 1S |
| roborock.vacuum.p5 | Roborock P5 |
| roborock.vacuum.s4 | Roborock S4 |
| roborock.vacuum.s5 | Mi Robot Vacuum v2 / Roborock Vacuum S5 / Roborock Vacuum S50 |
| roborock.vacuum.s5e | Roborock S5 Max |
| roborock.vacuum.s6 | Roborock S6 |
| roborock.vacuum.t4 | Roborock T4 |
| roborock.vacuum.t6 | Roborock T6 |
| roborock.vacuum.t7 | Roborock Vacuum T7 |
See supported robots and capability matrix here (based on get_fw_features command)
:warning: Depending on the model and firmware version, not all commands might be available.
The last columns show for which models the commands are available (assumed the latest firmware is installed).
If there is no entry, the command is available for each device.
| Type | Command | Documentation | Only available for |
|---|---|---|---|
| APPSTAT | app_stat | ||
| CARPET_MODE_GET | get_carpet_mode | - | s5e |
| CARPET_MODE_SET | set_carpet_mode | - | s5e |
| CHARGE | app_charge | Basic Operations | |
| CLEAN_RECORD_DEL | del_clean_record | - | s5e |
| CLEAN_RECORD_GET | get_clean_record | Clean Summary | |
| CLEAN_RECORD_MAP_GET | get_clean_record_map | Clean Summary | |
| CLEAN_SUMMARY_GET | get_clean_summary | Clean Summary | |
| CONSUMABLES_GET | get_consumable | Consumable | |
| CONSUMABLES_RESET | reset_consumable | Consumable | |
| CUSTOM_MODE_GET | get_custom_mode | Custom Mode | |
| CUSTOM_MODE_SET | set_custom_mode | Custom Mode | |
| CUSTOM_MODE_WATERBOX_GET | get_water_box_custom_mode | Water Box Custom Mode | s5e |
| CUSTOM_MODE_WATERBOX_SET | set_water_box_custom_mode | Water Box Custom Mode | s5e, s6 |
| DELETESELECTMAP | del_map | ||
| DND_CLOSE | close_dnd_timer | Do Not Disturb | |
| DND_GET | get_dnd_timer | Do Not Disturb | |
| DND_SET | set_dnd_timer | Do Not Disturb | |
| FIND_ME | find_me | Find Robot | |
| GETCLEANRECORDMAPV2 | get_clean_record_map_v2 | ||
| GETCUSTOMCLEANMODE | get_customize_clean_mode | ||
| GETFRESHMAP | get_fresh_map | ||
| GETLEDSTATUS | get_led_status | ||
| GETMAP | get_map | ||
| GETMAPV2 | get_map_v2 | ||
| GETMULTIMAP | get_multi_map | ||
| GETPERSISTMAP | get_persist_map | ||
| GETPROP | get_prop | ||
| GETSERVERTIMER | get_server_timer | ||
| GETSTATUS | app_get_status | ||
| GET_FW_FEATURES | get_fw_features | Firmware Features | s5e |
| GET_INIT_STATUS | app_get_init_status | Initial Status | s5e |
| GET_LOCALE | app_get_locale | Locale Information | s5e |
| GET_NETWORK_INFO | get_network_info | Netwotk info | s5e, s5, s7, s6 |
| GET_SERIAL_NUMBER | get_serial_number | Serial Number | |
| GET_STATUS | get_status | Status Message | |
| GOTOTARGETSTOP | stop_goto_target | ||
| GOTO_TARGET | app_goto_target | Goto Target | v1, s5, s6, s5e |
| LOADMULTIMAP | load_multi_map} | ||
| LOG_UPLOAD_ENABLE | enable_log_upload | - | |
| LOG_UPLOAD_GET | get_log_upload_status | Log Upload | |
| LOG_UPLOAD_USER | user_upload_log | - | s5e |
| MANUALSEGMENTMAP | manual_segment_map | ||
| MAPS_GET_MULTI_MAPS | get_multi_maps_list | Multimap | s5e, s7, s6 |
| MAPS_LOAD_MULTI_MAP | load_multi_map | Multimap | s5e, s7, s6 |
| MAPS_RECOVER_GET | get_recover_maps | - | s5e |
| MAP_EDIT_END | end_edit_map | - | s5e |
| MAP_EDIT_START | start_edit_map | - | s5e |
| MAP_RECOVER | recover_map | - | s5e |
| MAP_RECOVER_GET | get_recover_map | - | s5e |
| MAP_RESET | reset_map | - | s5e |
| MAP_SAVE | save_map | Map | s5, s6, s5e |
| MAP_STATUS_GET | get_map_status | - | s5e |
| MAP_USE_NEW | use_new_map | - | s5e |
| MAP_USE_OLD | use_old_map | - | s5e |
| MAP_V1_FRESH_GET | get_fresh_map_v1 | - | s5e |
| MAP_V1_GET | get_map_v1 | Map V1 | |
| MAP_V1_PERSIST_GET | get_persist_map_v1 | - | s5e |
| NAMEMULTIMAP | name_multi_map | ||
| PAUSE | app_pause | Basic Operations | |
| RECOVERMULTIMAP | recover_multi_map | ||
| REMOTE_END | app_rc_end | Remote Control | |
| REMOTE_MOVE | app_rc_move | Remote Control | |
| REMOTE_START | app_rc_start | Remote Control | |
| ROOM_MAPPING_GET | get_room_mapping | Room Mapping | s5e, m1s |
| SEGMENT_CLEAN_RESUME | resume_segment_clean | Segment Cleaning | s5e |
| SEGMENT_CLEAN_START | app_segment_clean | Segment Cleaning | s5, s5e, m1s |
| SEGMENT_CLEAN_STOP | stop_segment_clean | Segment Cleaning | s5e |
| SEGMENT_MERGE | merge_segment | - | s5e |
| SEGMENT_NAME | name_segment | - | s5e |
| SEGMENT_SPLIT | split_segment | - | s5e |
| SEGMENT_STATUS_GET | get_segment_status | - | s5e |
| SETAPPTIMEZONE | set_app_timezone | ||
| SETCUSTOMCLEANMODE | set_customize_clean_mode | ||
| SETFDSENDPOINT | set_fds_endpoint | ||
| SETLEDSTATUS | set_led_status | ||
| SETSWITCHMAPMODE | set_switch_map_mode | ||
| SET_LAB_STATUS | set_lab_status | Lab Status | s5, s6, s5e |
| SOUND_CURRENT_GET | get_current_sound | Current Sound | |
| SOUND_INSTALL | dnld_install_sound | Voice Pack Installation | |
| SOUND_PROGRESS_GET | get_sound_progress | Voice Pack Installation | s5e |
| SOUND_VOLUME_CHANGE | change_sound_volume | Sound Volume | s5e |
| SOUND_VOLUME_GET | get_sound_volume | Sound Volume | |
| SOUND_VOLUME_TEST | test_sound_volume | Sound Volume | s5e |
| START_SPOT | app_spot | Basic Operations | |
| START_VACUUM | app_start | Basic Operations | |
| STOP_VACUUM | app_stop | Basic Operations | |
| TIMERSTART | start_clean | ||
| TIMER_DEL | del_timer | Cleaning Timer | |
| TIMER_GET | get_timer | Cleaning Timer | |
| TIMER_SERVER_DEL | del_server_timer | Cleaning Timer | s5e |
| TIMER_SERVER_GET | get_server_timer | Cleaning Timer | s5e |
| TIMER_SERVER_SET | set_server_timer | Cleaning Timer | s5e |
| TIMER_SERVER_UPDATE | upd_server_timer | Cleaning Timer | s5e |
| TIMER_SET | set_timer | Cleaning Timer | |
| TIMER_UPDATE | upd_timer | Cleaning Timer | |
| TIMEZONE_GET | get_timezone | Timezone | |
| TIMEZONE_SET | set_timezone | Timezone | |
| WAKEUP_ROBOT | app_wakeup_robot | s5e | |
| ZONED_CLEAN_RESUME | resume_zoned_clean | Zone Cleaning | s5e |
| ZONED_CLEAN_START | app_zoned_clean | Zone Cleaning | v1, s5, s6, s5e |
| ZONED_CLEAN_STOP | stop_zoned_clean | Zone Cleaning | s5e |
:information_source: These commands appear to be shared amongs all(?) Xiaomi Mi Io devices.
| Type | Command | Documentation |
|---|---|---|
| INFO | miIO.info |
Info |
| ROUTER | miIO.config_router |
- |
| OTA | miIO.ota |
Update Firmware Over Air |
| OTA_PROG | miIO.get_ota_progress |
- |
| OTA_STATE | miIO.get_ota_state |
- |
| WIFI_STATE | miIO.wifi_assoc_state |
Wifi Status |
There are few models that take the same commands but preponed with user.
Below are the known ones:
| Type | Command |
|---|---|
| GETMAP | user.app_get_map |
| APPCHARGE | user.app_home |
| APPPAUSE | user.app_pause |
| APPREMOTECONTROLEND | user.app_rc_end |
| APPREMOTECONTROLMOVE | user.app_rc_move |
| APPREMOTECONTROLSTART | user.app_rc_start |
| APPSPOT | user.app_spot |
| APPSTART | user.app_start |
| APPWAKEUPROBOT | user.app_wakeup_robot |
| CLOSEDNDTIMER | user.close_dnd_timer |
| DELTIMER | user.del_timer |
| ENABLELOGUPLOAD | user.enable_log_upload |
| FINDME | user.find_me |
| GETCARPETMODE | user.get_carpet_mode |
| GETCLEANRECORD | user.get_clean_record |
| GETCLEANRECORDMAP | user.get_clean_record_map |
| GETCLEANRECORDMAPV2 | user.get_clean_record_map_v2 |
| GETCLEANSUMMARY | user.get_clean_summary |
| GETCURRENTSOUNDPACKAGE | user.get_current_sound |
| GETCUSTOMMODE | user.get_custom_mode |
| GETDNDTIMER | user.get_dnd_timer |
| GETLOGUPLOADSTATUS | user.get_log_upload_status |
| GETMAPANDROID | user.get_map_v1 |
| GETMAPV2 | user.get_map_v2 |
| GETSERIALNUMBER | user.get_serial_number |
| GETSOUNDPACKAGEPROGRESS | user.get_sound_progress |
| GETSOUNDVOLUME | user.get_sound_volume |
| GETSUPPLIES | user.get_consumable |
| GETTIMER | user.get_timer |
| GETTIMEZONE | user.get_timezone |
| GOTOTARGET | user.app_goto_target |
| GOTOTARGETSTOP | user.stop_goto_target |
| RESETSUPPLIES | user.reset_consumable |
| RESUMEZONEDCLEAN | user.app_resume_zoned_clean |
| SETCARPETMODE | user.set_carpet_mode |
| SETCUSTOMMODE | user.set_custom_mode |
| SETDNDTIMER | user.set_dnd_timer |
| SETSOUNDPACKAGE | user.dnld_install_sound |
| SETSOUNDVOLUME | user.change_sound_volume |
| SETTIMER | user.set_timer |
| SETTIMEZONE | user.set_timezone |
| STARTZONEDCLEAN | user.app_zoned_clean |
| STOPZONEDCLEAN | user.stop_zoned_clean |
| TESTSOUNDVOLUME | user.test_sound_volume |
| TIMERSTART | user.start_clean |
| UPDTIMER | user.upd_timer |
:exclamation: Suggestions & improvements very welcome!