mariolukas
commented
7 years ago "Start Calibration" does the laser line detection and calculates the laser angle. In older software versions this was done before each scan. But in some cases ( when the object is too big ), the laser can not be detected on the back wall. This was the reason why the laser line detection ( angle calculation ) was separated from the scanning process.
All the calibration related stuff in the current version is deprecated. The new version of FabScanPi-Server will bring auto calibration, where a chessboard is placed on the turntable. All measurements will be done automatically. You can find a early pre release in the auto calibration branch https://github.com/mariolukas/FabScanPi-Server/tree/autocalibration
The new config will look like:
{ "folders": { "www": "/var/www/", "scans": "/var/scans/" }, "laser": { "steps": 3200, "numbers": 1, "rotation_steps": 5 }, "scanner_type": "laserscanner", "calibration": { "weight_matrix": [], "dist_camera_matrix": [], "pattern": { "square_size": 11, "rows": 6, "columns": 9, "origin_distance": 29 }, "camera_matrix": [ [ 1285.5809999999999, 0.0, 647.60199999999998 ], [ 0.0, 1289.9490000000001, 835.84400000000005 ], [ 0.0, 0.0, 1.0 ] ], "distortion_vector": [ 0.151, -0.20300000000000001, -0.0050000000000000001, 0.0060000000000000001, -0.70899999999999996 ], "laser_planes": [ { "deviation": 0.052318819865, "distance": 137.366403938, "normal": [ 0.56199451, -0.01896656, 0.82692348 ] } ], "platform_translation": [ 4.21176054e-03, 4.26178340e+01, 1.66114592e+02 ], "platform_rotation": [ [ 0.0, 9.99977231e-01, 6.74816764e-03 ], [ 4.51612662e-02, 6.74128255e-03, -9.98956964e-01 ], [ -0.99903697271524872, 0.00030800546235732861, -0.043875189806843448 ] ] }, "meshlab": { "path": "/usr/bin/" }, "process_numbers": 4, "turntable": { "steps": 3200 }, "camera": { "resolution": { "width": 1640, "height": 1232 }, "preview_resolution": { "width": 240, "height": 320 }, "rotate": "True", "hflip": "True", "vflip": "False", "type": "PICAM" }, "serial": { "baudrate": 115200, "autoflash": "True", "port": "/dev/ttyAMA0" }, "texture_illumination": 200 }
But there is no calibration until now. I am doing some final tests and then i will do a release.
dlarue
Lots of the calibration items are well documented in the Software section here: https://mariolukas.github.io/FabScanPi-Server/software/
But what I've not found was how to use the Calibration item with the horizontal green line and vertical green. I've seen old documents which say the horizontal green line should be lined up behind the Turn Table at the corner of the platform and back of box. Another looks like it's aligned at the center of the turn table based on what looks like the duck being scanned.
Also not yet found is what the "Start Calibration" item does and how it effects the default.settings.json file. I currently don't have a stepper motor on my laser and having a tough time getting the system calibrated to produce a well formed model.