brother_ql-inventree

Python package for the raster language protocol of the Brother QL series label printers

FORK NOTICE

This is a fork of https://github.com/pklaus/brother_ql by Philipp Klaus to enable faster updates. Check out https://github.com/inventree/inventree to see what I forked it for.

Verified models

Verified devices

✓ means the device was verified by the original project

QL-500 (✓), QL-550 (✓), QL-560 (✓), QL-570 (✓), QL-580N QL-600 (✓), QL-650TD QL-700 (✓), QL-710W (✓), QL-720NW (✓) QL-800 (✓), QL-810W (✓), QL-820NWB (✓) QL-1050 (✓), QL-1060N (✓), QL-1100 (✓), QL-1110NWB, QL-1115NWB.

Verified labels

The available label names can be listed with brother_ql info labels:

 Name      Printable px   Description
 12         106           12mm endless
 12+17      306           12mm endless
 18         234           18mm endless
 29         306           29mm endless
 38         413           38mm endless
 50         554           50mm endless
 54         590           54mm endless
 62         696           62mm endless
 62red      696           62mm endless (black/red/white)
 102       1164           102mm endless
 103       1200           104mm endless
 104       1200           104mm endless
 17x54      165 x  566    17mm x 54mm die-cut
 17x87      165 x  956    17mm x 87mm die-cut
 23x23      202 x  202    23mm x 23mm die-cut
 29x42      306 x  425    29mm x 42mm die-cut
 29x90      306 x  991    29mm x 90mm die-cut
 39x90      413 x  991    38mm x 90mm die-cut
 39x48      425 x  495    39mm x 48mm die-cut
 52x29      578 x  271    52mm x 29mm die-cut
 54x29      598 x  271    54mm x 29mm die-cut
 60x86      672 x  954    60mm x 87mm die-cut
 62x29      696 x  271    62mm x 29mm die-cut
 62x100     696 x 1109    62mm x 100mm die-cut
 102x51    1164 x  526    102mm x 51mm die-cut
 102x152   1164 x 1660    102mm x 153mm die-cut
 103x164   1200 x 1822    104mm x 164mm die-cut
 d12         94 x   94    12mm round die-cut
 d24        236 x  236    24mm round die-cut
 d58        618 x  618    58mm round die-cut
 pt12       - unknown -   12mm endless
 pt18       - unknown -   18mm endless
 pt24       - unknown -   24mm endless
 pt36       - unknown -   36mm endless

Backends

There are multiple backends for connecting to the printer available (✔: supported, ✘: not supported):

Backend	Kind	Linux	Mac OS	Windows
network (1)	TCP	✔	✔	✔
linux_kernel	USB	✔ (2)	✘	✘
pyusb (3)	USB	✔ (3.1)	✔ (3.2)	✔ (3.3)

Warning: when using one of the USB backends make sure the Editor Lite feature is turned off (if your model supports it), otherwise the USB Printer interface won't be detected.

Significant Changes:

v 1.3:

Added detection of more media and commands to list and configure settings https://github.com/matmair/brother_ql-inventree/pull/57
Added new cli command for getting the status of printers https://github.com/matmair/brother_ql-inventree/pull/53

v1.2:

Remove support for Python 2 https://github.com/matmair/brother_ql-inventree/pull/43 / https://github.com/matmair/brother_ql-inventree/pull/45
Added support for PT-E550W https://github.com/matmair/brother_ql-inventree/pull/44
Added label support for 12+17 https://github.com/matmair/brother_ql-inventree/pull/42

v1.1:

Support for Pillow 10.x https://github.com/matmair/brother_ql-inventree/pull/37 v1.0:
Renamed the package to brother_ql-inventree and added a release action https://github.com/matmair/brother_ql-inventree/pull/16
Added printer support for QL-600 https://github.com/matmair/brother_ql-inventree/pull/17 , PT-P950NW https://github.com/matmair/brother_ql-inventree/pull/6 , QL-1100, L-1100NWB, QL-1115NWB https://github.com/matmair/brother_ql-inventree/pull/18
Added label support for DK-1234 https://github.com/matmair/brother_ql-inventree/pull/22 , 54x29 https://github.com/matmair/brother_ql-inventree/pull/19 , DK22246 https://github.com/matmair/brother_ql-inventree/pull/20, ...

Read the full old Readme here.

matmair / brother_ql-inventree

readme