netatmo - weewx driver for netatmo weather stations Copyright 2015 Matthew Wall Distributed under terms of the GPLv3

This driver has two modes of operation. It can use the netatmo API to obtain data from the netatmo servers, or it can parse the packets sent from a netatmo station. The latter works only with netatmo firmware 101 (circa early 2015). Firmware 102 introduced arbitrary encryption in response to a poorly chosen decision to include the wifi password in network traffic sent to the netatmo servers. Unfortunately, the encryption blocks end-users from accessing their data, while the netatmo stations might still send information such as the wifi password to the netatmo servers.

By default this driver will operate in 'cloud' mode.

Communication with the netatmo servers requires 4 things: username, password, client_id, and client_secret. The username and password are the credentials used to access data at netatmo.com. The client_id and client_secret must be obtained via the dev.netatmo.com web site. Using these 4 things, the driver automatically obtains and updates the tokens needed to get data from the server.

=============================================================================== Installation instructions:

1) download the driver:

wget -O weewx-netatmo.zip https://github.com/matthewwall/weewx-netatmo/archive/master.zip

2) install the driver:

sudo wee_extension --install weewx-netatmo.zip

3) select and configure the driver:

sudo wee_config --reconfigure

4) start weewx:

sudo /etc/init.d/weewx start