KissKONG - Next Generation KISS OSD

This is a written-from-scratch code to communicate with KISS FC and control MAX7456 to disaply OSD GUI

Code is currently compatible with MinimOSD hardware and any ATmega328p with MAX7456 on default SPI pins

KissAndMsp, Tramp and MAX7456 are stand-alone libs that can be used in other projects.

To be able to use the menu to change settings, ARM MUST be set to be controlled by a switch! If setting is not detetcted, only live data and flight statistics will be shown.

Installing

• Download recent verion of Arduino IDE
• First open FontUploadSketch.ino in Arduino IDE
• Select board to be "Arduino Pro Mini 5V 16MHz"
• Upload the sketch to MinimOSD to update the font
• Next open KissKongOSD.ino in Arduino IDE and Upload it as above
• Done

Controls (Throttle always in center)

• Enter Main Menu -> Yaw Right + Roll Left
• Move Left /Right -> Roll (also Enter/Exit in Menu/Info)
• Move Up/Down -> Pitch
• Enter/Exit(Add/Substract) -> Yaw

Menu can be entered ONLY when disarmed

Tramp VTX Support

Connect Tramp VTX Telemetry wire to the current sensing pin of MicroMinimOSD to control your VTX through the OSD

There are plans to use the built-in Tramp support in Kiss FC when one is not detected on the current pin

Example Screens

Armed

Main Menu

Settings

PIDs

Rates

Extra PIDs

Filters

Info

Flight Statitics

Tramp VTX