I have a problem syncing with the MIDI clock.
Machinedrum (MD) is sending MIDI clock to Performer via MIDI-TRS cable (type A).
The Performer doesn't start when the MD is running.
Clock settings on Performer:
Mode: Auto (or Slave)
MIDI RX - yes
When MD is running, the MIDI Monitor page shows:
NOTE OFF
CH=1 NOTE=36/38 VEL=0
The latest 0.2.0 firmware is on the Performer.
Edit: on the other side, syncing MIDI from Perfomer to MD works ok.
Edit 2: sorry, my bad, there was an issue with the MD. MIDI clock from MD to Performer now works perfectly :)
I have a problem syncing with the MIDI clock. Machinedrum (MD) is sending MIDI clock to Performer via MIDI-TRS cable (type A). The Performer doesn't start when the MD is running. Clock settings on Performer: Mode: Auto (or Slave) MIDI RX - yes
When MD is running, the MIDI Monitor page shows: NOTE OFF CH=1 NOTE=36/38 VEL=0
The latest 0.2.0 firmware is on the Performer.
Edit: on the other side, syncing MIDI from Perfomer to MD works ok. Edit 2: sorry, my bad, there was an issue with the MD. MIDI clock from MD to Performer now works perfectly :)