Name | Category | Tested and Working | Instructions |
---|---|---|---|
Alto Trombone | Wind | :white_check_mark: | |
Baglama | String | :white_check_mark: | |
Book Of Boba Fett Catina Fretless Guitar | String | ||
Book Of Boba Fett Catina Guitar | String | ||
Double Neck Ukulele Madoline | String | ||
Duduk | Wind | :white_check_mark: | |
Duduk Ariane 5 | Wind | :white_check_mark: | |
Duduk In F | Wind | :white_check_mark: | |
Electric semi acoustic nylon mandoline | String | :white_check_mark: | |
Flying Microtonal Guitalele | String | :white_check_mark: | |
Fred The Eurorack Module | Other | :white_check_mark: | |
Fretless Gurdy | String | ||
Guqin | String | ||
Kitty Bone | Wind | :white_check_mark: | |
Kokyu | String | :white_check_mark: | |
Micro Trumpet | Wind | ||
Multi Intrument | other | :white_check_mark: | |
Nano Trumpet | Wind | ||
Oud | String | :white_check_mark: | |
Pan Flute | Wind | :white_check_mark: | |
Saz | String | :white_check_mark: | |
Sazando | String | :white_check_mark: | |
Serpent | Wind | :white_check_mark: | |
Shakuachi | Wind | :white_check_mark: | |
Squarebone | Wind | :white_check_mark: | |
Tagelharpa Mini | String | :white_check_mark: | |
Trisax | Wind | :white_check_mark: | |
Zurna_Duduk | Wind | :white_check_mark: |
This is a greek traditional instrument To assemble it you need a 6mm steel rod
You need two 12mm metal rod to assembled it
You need a 12mm metal rod to assembled it
This is a Flying Microtonal Guitalele inspired by King Gizzard and the Lizard Wizard You need a 6 mm metal rod to assemble it
A fretless hudy gurdy like a violia but with a wheel you need three metal rod to assemble it : 8mm x 500mm, 8mm x 110mm and 6mm x 380mm
This is a traditional chinese instrument with seven strings
This is a traditional japanese bowed string instrument
This is an oud this a short-neck lute-type, pear-shaped, fretless stringed instrument. There is a thin one (easier to print less plastic and the one i printed) and a fat one (bigger and more close to a traditional one). You will need two 2 mm metal rod and a 6mm one for assembly with 6 guitar tuning peg.
This is a long neck luth You need a 8 mm metal rod to assemble it I put the 3 Low strings of a nylon guitar. Tuned in D A d
This is a sasando, a tube zither from the Rote island (indonesia)
A mini tagelharpa i designed in catia, this is a bowed lyre You need two 6mm metal rod to assemble it
An alto trombone to print You can print it in 3 parts if your printer is big enough. Otherwise the main 3 parts can be printeted and assembled individualy, you need to print every parts 1 time except the innerslide an outerslide connector that should be printed 4 times each.
This is a duduk in C, it works with any duduk reeds. If you print it in 2 part you have to glue the two parts to reduce any air leaks.
This is a duduk in C that is shaped like a rocket (ariane 5).
This is a duduk in F The fingering is not similar to a traditional duduk
This is a picollo trombone but better because Cats the tail is optional as it get in your face you will need to glue the bell part 1, the bell part 2 and the nose and whiskers in order to assembeled them the UWU mouthpiece icluded works but you will get a better sound with a trumpet or trombone mouthpiece.
This is a pan flute in C
This is a straight version of a bass serpent however in soprano size. The model had been cut to be printed in smaller part. Tt shoud work with any standart trombone mouthpiece.
This is a japanese traditional instrument
This is a picolo trombone with a squares, it is dimentioned to work with any standartd mouthpiece
This is a mini saxophone in B.
This is a zurna type intrument in E that you use with a duduk mouthpiece
This is a Pan Flute, a Ukulele, a Trumpet, an Harp, a Trombone and a Kazzo .