search

mercenaruss / zigbee-stick-v4

Zigbee Stick based on RF-BM-2652P1/P2 Module from RF-STAR,with CC2652P on board
https://zig-star.com
Other
85 stars 29 forks source link

Router problem #2

Closed r312645 closed 3 years ago

r312645 commented 3 years ago

I flashed this router firmware. It works well, but how do I re-pair to other coordinator? I pressed the reset button but nothing happened.

mercenaruss commented 3 years ago

Please flash next firmware: https://github.com/Koenkk/Z-Stack-firmware/blob/master/router/Z-Stack_3.x.0/bin/CC1352P2_CC2652P_launchpad_router_20210128.zip

Before flash, let coordinator be in pairing mode,so when router is flashed he will search automatically to pair.

r312645 commented 3 years ago

Thanks for reply. Does that mean I can only re-flash the firmware to re-pair ? Can I reset router like the picture below？

Screenshot_2021-02-04-22-40-56-55

mercenaruss commented 3 years ago

you can do it,you have 2 button on PCB,try them,i didnt install this firmware,i need to test.

r312645 commented 3 years ago

I found that the bsl button works, thank you. I have not installed the bsl button because I do not have 100 ohm. Now I use 1k ohm on the bsl button, will this cause any problems?

Radu notifications@github.com 於 2021年2月4日 週四 23:29 寫道：

you can do it,you have 2 button on PCB,try them,i didnt install this firmware,i need to test.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mercenaruss/zigbee-stick-v4/issues/2#issuecomment-773394326, or unsubscribe https://github.com/notifications/unsubscribe-auth/AN333HII6UOQZHEGACJHE6DS5K4PJANCNFSM4XCOSDFA .

mercenaruss commented 3 years ago

se any problems?

if button is its working then no problem. Thank you for update.