ZigStar Stick and Shield ZIG-STAR.COM
Features:
- TI CC2652P SimpleLink™ 2.4 GHz Multiprotocol Wireless MCU targeting Zigbee,Bluetooth 5.1 Low Energy,Thread + 19.5-dBm high-power amplifier
- Support RF-BM-2652P1 and RF-BM-2652P2 Module from RF-STAR,with CC2652P on board
- BSL,RST Buttons
- 2 LED for indication
- Compatible with Z2M and ZHA
- SMA antenna port for an external antenna
- Self-programming via the cc2538-bsl.No external programmer needed! Push BSL button to trigger this mode.
- Communicates via the common CH340E/CH340C USB-UART Bridge
For all documentation,description and instructions visit: ZIG-STAR.COM
Web-site is filled gradually.
Contact
For general enquiries, suggestions and errors spotted: Email me at support@zig-star.com or write me directly in Telegram. Community contributions to this page are very much encouraged so you could also send pull requests with your proposed changes.
License
zigbee-stick-v4 is designed by DarthPCB's / Grecu Radu and licensed under the Solderpad Hardware License v2.1.