gsp-r10-adapter

Utility to bridge R10 launch monitor to GSPro. Supports the following

An "E6 Connect" compatible server for use with the Launch Monitor's E6 integration
Direct bluetooth connection to R10
Webcam putting integration with https://github.com/alleexx/cam-putting-py

The goal of this project was to provide an ultra lightweight alterntive to the current offerings, with a focus on API transparency.

Sample

Using Direct Bluetooth Connector

In order to use the direct bluetooth connection to the R10 you must

Enable bluetooth in settings.json file
Edit settings.json to reflect your desired altitude, tee distance, temperature, etc.
Set device in pairing mode (blue blinking light) by holding power button for few seconds
Pair the R10 from the windows bluetooth settings
- On windows 11 you may need to set "Bluetooth Device Discovery" to advanced
- This step only needs to be done once
- You may need to disable bluetooth on previously paired devices to prevent them from stealing the connection

In order to use the putting integration you must

Enable putting in settings.json file
Download ball_tracking software from https://github.com/alleexx/cam-putting-py/releases
- If you want this program to manage opening/closing of putting camera, place ball_tracking in same folder as this program
Read https://github.com/alleexx/cam-putting-py for webcam setup/troubleshooting
Read putting section settings.json file to determine optimal settings for your setup

Download either the standalone or net6 package from the release page. Extract zip to your local machine and run the exe file.
- Use the standalone package if you are unsure whether your computer has a dotnet runtime installed
- Use the net6 package if you believe your computer has a dotnet runtime installed.