Updated Thetis with support for Hermes Lite 2 functionality
25
stars
6
forks
source link
readme
Latest Release v2.10.3.6 Beta 2 20th July, 2024
2.10.3.6 Beta 2 (2024-07-20)
Updated code base to latest official release (2.10.3.6 dev_6b)
Fix for HL2 of Tx attenuator in official codebase
Removed automatic renaming of database folder, the Thetis-HL2-x64 must be manually renamed to Thetis-x64
2.10.3.5 (2024-07-06)
Updated to allow RF off delay before releasing PTT for Tun & 2TON
Updated to not over write txtPSpeak for PS
Updated to handle existing database.bak
2.10.3.5 Beta 6 (2024-06-17)
HL2 now uses common directory for database
Updated code base to latest official release (2.10.3.6 dev_3)
Updated to allow ASIO on Protocol 1, YMMV
2.10.3.5 Beta 5 (2024-05-24)
Added missing label for auto attenuator
Corrected reverse power calculation
Fixed tune power slider not remembering max setting
2.10.3.5 Beta 4 (2024-05-04)
Updates from official repo
Fixed custom display showing all lines at startup
Added ability to control ICOM ATU power blip at start of tune (Setup|General|PA Control|ATU|Standalone ATU)
Fixed issue with CL2 control when I/O Board is not fitted
2.10.3.5 Beta 3 (2024-04-21)
Fixed incorrect display of forward and reverse power
Fixed incorrect noise floor on Rx2 when changing frequency
Update I2C control to make it more robust
Added ability to control I/O Board output port
Fixed PS Sync option not updating on startup
2.10.3.5 Beta 2 (2024-03-20)
Updated with code updates to integrate with official code base
Removed HL2 options to it's own tab within the Options tab
2.10.3.5 Beta 1 (2024-03-03)
Updated with latest code updates from official code base
Updated the low level code in preparation for merger into official code base
2.10.3.4 Beta 3 (2024-01-07)
Fixed Minor UI updates for better skin alignment.
Fixed Tune/Drive slider limits.
Added Gateware patch version to title and setup display.
Added support for register 32 for I/O Board giving current mode.
2.10.3.4 Beta 2 (2023-11-30)
Added extra support for ATU tuning. This is for use with the I/O Board. Thetis now reports returned errors and the power for an ATU can be controlled via the fixed drive setting.
Added right click limits in the Drive and Tune Drive sliders.
Fixed title display, now responses correctly to IP address tick box.
2.10.3.3 (2023-11-13)
Formal release.
Fixed issue were using the 10Mhz input would affect I/O Board.
2.10.3.3 Beta 1 (2023-11-03)
Updated codebase to reflect changes added to official Thetis.
2.10.3.0 Beta 1 (2023-11-02)
Updated codebase to reflect changes added to official Thetis.