This is a custom integration for Home Assistant to integrate with the Zehnder ComfoAirQ ventilation system. It's using the aiocomfoconnect library.
This custom integration is an upgrade over the existing comfoconnect
integration and is meant for testing purposes. The goal is eventually to replace the existing comfoconnect
integration in Home Assistant.
This integration supports the following additional features over the existing integration:
Note: Not all sensors are enabled by default. You can enable them on the integration page.
The easiest way to install this integration is through HACS.
https://github.com/michaelarnauts/home-assistant-comfoconnect
) as a custom repository in HACS.
See here for more information.Zehnder ComfoAirQ
integration.If you have the existing comfoconnect
integration installed, the configuration should be picked up, but you might need to change your existing sensors ids.
You should also remove the old configuration from the configuration.yaml
file.
If not, you can add the integration through the UI by going to the integrations page and adding the Zehnder ComfoAirQ
integration.