microtrigger ardu-imu issues

microtrigger / ardu-imu

Automatically exported from code.google.com/p/ardu-imu

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Wrong values and very upset

#35 GoogleCodeExporter opened 9 years ago
0
my imu sends me wrong yaw values

#34 GoogleCodeExporter opened 9 years ago
0
Compiling 1.9.8

#33 GoogleCodeExporter opened 9 years ago
0
Code compiles but never uploads

#32 GoogleCodeExporter opened 9 years ago
0
Documentation, ground start and other code queries

#31 GoogleCodeExporter opened 9 years ago
1
Make is broken

#30 GoogleCodeExporter opened 9 years ago
0
Scalar factor in DCM undocumented and not in repo - 1.9.8 release

#29 GoogleCodeExporter opened 9 years ago
0
Binary output is ASCII

#28 GoogleCodeExporter opened 9 years ago
2
Random values w/ ArduIMU v3 (software ver. 1.9.8)

#27 GoogleCodeExporter opened 9 years ago
2
Use Barometer 1 errors

#26 GoogleCodeExporter opened 9 years ago
0
Freeing up the interrupt pins

#25 GoogleCodeExporter opened 9 years ago
0
ArduIMU 1.9.8 does not compile

#24 GoogleCodeExporter opened 9 years ago
6
Problem

#23 GoogleCodeExporter opened 9 years ago
2
All axes output wrong reading

#22 GoogleCodeExporter opened 9 years ago
2
1.9 firmware with ArduIMU v3 drifts in action

#21 GoogleCodeExporter opened 9 years ago
0
Latest ArduIMU software does not compile with latest version of Arduino

#20 GoogleCodeExporter opened 9 years ago
4
YAW is asynchron between north and south

#19 GoogleCodeExporter opened 9 years ago
1
EM406 not locking

#18 GoogleCodeExporter opened 9 years ago
0
LINUX build

#17 GoogleCodeExporter opened 9 years ago
0
Dead-reckoning in the firmware?

#16 GoogleCodeExporter opened 9 years ago
1
EM406 changes baud rate from 38400 to 57600

#15 GoogleCodeExporter opened 9 years ago
0
BMP085 and HMC5843

#14 GoogleCodeExporter opened 9 years ago
30
Problem with PWM

#13 GoogleCodeExporter opened 9 years ago
1
Conversion of acceleration seems wrong (via Accel_Scale macro)

#12 GoogleCodeExporter opened 9 years ago
3
Error Compiling with USE_MAGNETOMETER == 1

#11 GoogleCodeExporter opened 9 years ago
10
Ublox GPS ground speed/course can not update consistently

#10 GoogleCodeExporter opened 9 years ago
0
GPS disconnection does not eliminate GPS lock light

#9 GoogleCodeExporter opened 9 years ago
0
Pb compiling arduimu 1.8 with use_magnetometer = 1

#8 GoogleCodeExporter opened 9 years ago
1
Upload problem of V1.8

#7 GoogleCodeExporter closed 9 years ago
3
Setting PERFORMANCE_REPORTING to 0 causes compilation error

#6 GoogleCodeExporter closed 9 years ago
2
SIRF GPS

#5 GoogleCodeExporter closed 9 years ago
1
Compile Problem

#4 GoogleCodeExporter closed 9 years ago
1
My last update

#3 GoogleCodeExporter closed 9 years ago
1
some enhancement

#2 GoogleCodeExporter opened 9 years ago
1
GPS Checksum Bad

#1 GoogleCodeExporter opened 9 years ago
1