mikey0000 / Mammotion-HA

Home Assistant integration for Luba lawn mower
82 stars 8 forks source link

Connectivity dropping #11

Closed mllockwood closed 1 week ago

mllockwood commented 1 month ago

First off, thank you so much for starting this integration. I have it setup and it's "working". But, HA seems to connect and disconnect quite often from my Luba 2. Is the only source of connectivity between HA and the Luba 2 via Bluetooth? Or, does it also connect via IP to the mower and/or RTK? I'm wondering if my connection issues are related to the mower getting close, and then too far away from, my ESP32 Bluetooth proxy. Or, if having the mower and RTK on a separate VLAN from HA might be an issue? Thanks!

mikey0000 commented 1 month ago

At the moment it's Bluetooth, there is an issue somewhere, sometimes on second connect it sometimes fails. Not sure why, and doesn't happen consistently. We are working away at cloud / WiFi support but it's not easy.

8/06/2024 7:24:05 am Michael Lockwood @.***>:

First off, thank you so much for starting this integration. I have it setup and it's "working". But, HA seems to connect and disconnect quite often from my Luba 2. Is the only source of connectivity between HA and the Luba 2 via Bluetooth? Or, does it also connect via IP to the mower and/or RTK? I'm wondering if my connection issues are related to the mower getting close, and then too far away from, my ESP32 Bluetooth proxy. Or, if having the mower and RTK on a separate VLAN from HA might be an issue? Thanks!

— Reply to this email directly, view it on GitHub[https://github.com/mikey0000/HA-Luba/issues/11], or unsubscribe[https://github.com/notifications/unsubscribe-auth/AALDOPIW37YAVO7HLZNWCADZGICEVAVCNFSM6AAAAABI7GAAVSVHI2DSMVQWIX3LMV43ASLTON2WKOZSGM2DCMBTGU4TAMQ]. You are receiving this because you are subscribed to this thread. [Tracking image][https://github.com/notifications/beacon/AALDOPLN6VPUEN4HFNEL5STZGICEVA5CNFSM6AAAAABI7GAAVSWGG33NNVSW45C7OR4XAZNFJFZXG5LFVJRW63LNMVXHIX3JMTHIXCK7PY.gif]

mllockwood commented 1 month ago

Outstanding! And, thanks again for the work on this.

jLynx commented 3 weeks ago

Will re-open this issue for now as its still an existing bug. Will close once we have fixed it

lackr007 commented 2 weeks ago

Great work guys, loving this project! Can confirm the same behavior where all entities show unavailable then toggle back to valid values, the timing is very random. Using ESP32 with ESPHome Bluetooth proxy firmware, the ESP32 is 2 Ft from Luba 2 and 5 Ft from WIFI AP.

jLynx commented 1 week ago

This should now be fixed on the latest version