Mammotion - Home Assistant Integration

💬 Join us on Discord

This integration allows you to control and monitor your Mammotion Luba, Luba 2 & Yuka robot mowers using Home Assistant.

⚠️ Please note: This integration is still a work in progress. You may encounter unfinished features or bugs. If you come across any issues, please open an issue on the GitHub repository. 🐛

Roadmap 🗺️

• [x] Bluetooth (BLE) support
• [x] Wi-Fi support
• [ ] Scheduling
• [ ] Mapping and zone management
• [ ] Firmware updates
• [ ] Automations
• [ ] More...

Features ✨

• Start and stop the mower
• Monitor the mower's status (e.g., mowing, charging, idle)
• View the mower's battery level
• More features being added all the time!

Prerequisites 📋

• Home Assistant installed and running
• Mower connected to your home network
• Bluetooth proxy for Home Assistant

Installation 🛠️

This integration can be installed using HACS

1. Open the Home Assistant web interface.
2. Navigate to "Configuration" > "Integrations".
3. Click the 3 dots in the top right corner and select "Custom repositories".
4. In the "Add custom repository" dialog:
   • Repository: https://github.com/mikey0000/Mammotion-HA
   • Category: Select "Integration"
   • Click "ADD"
5. Close the custom repositories dialog.
6. Click the "+" button in the bottom right corner to add a new integration.
7. Search for "Mammotion" and select it from the list.
8. Follow the prompts to complete the setup:
   • Select your robot mower by name when prompted.
   • Click "Submit" to finalize the integration setup.
9. Restart Home Assistant to apply the changes.

Note: If you encounter any issues, please ensure that HACS is properly installed and configured in your Home Assistant instance.

Usage 🎮

Once the integration is set up, you can control and monitor your Mammotion mower using Home Assistant. 🎉

Troubleshooting 🔧

If you encounter any issues with the Mammotion integration, please check the Home Assistant logs for error messages. You can also try the following troubleshooting steps:

• Verify that you have Bluetooth proxy setup with Home Assistant.
• Ensure that your mower is connected to your home network and accessible from Home Assistant.
• Restart Home Assistant and check if the issue persists.

PyMammotion Library 📚

This integration uses the PyMammotion library to communicate with Mammotion mowers. PyMammotion provides a Python API for controlling and monitoring Mammotion robot mowers via MQTT, Cloud, and Bluetooth.

If the problem continues, please file an issue on the GitHub repository for further assistance. 🙏

Support me

Buy a Mammotion Lawn mower disclaimer: Referral link

Credits 👥