Additional Module for MagicMirror² https://github.com/MichMich/MagicMirror/
This module displays data from your Xiaomi smart home sensors (temperature, humidity, window state, light state). It also calculates recommended ventilation for your indoor rooms in case the humidity exceed 60%. This requires an outside sensor to take into account the outside humidity and temperature.
Iconography:
If you use the MAX! heating system you can install my other module MMM-max and include heating indication in this module as well.
git clone https://github.com/mirko3000/MMM-xiaomi
.git. A new folder will appear, navigate into it.npm install
To use this module, add it to the modules array in the config/config.js
file:
modules: [
{
module: 'MMM-xiaomi',
position: 'bottom_left',
header: 'Temperature / Humidity', // This is optional
config: {
// See 'Configuration options' for more information.
}
},
]
The following properties can be configured:
Option | Description |
---|---|
gatewayIP |
The IP address of your Xiaomi smarthome gateway. Possible values: 192.168.1.100
Default value: 192.168.0.1
This value is mandatory |
gatewayToken |
The optional authentification token for your gateway in case your device does not allow direct access. Possible values: cfbdb215c0824fcc971917e36822fcbe
Default value: none
This value is optional. |
animationSpeed |
The animation speed on refreshing data. Possible values: 500
Default value: 1000
This value is optional. |
outsideSensorId |
In case you have an sensor outside you can provide the ID here. This is used to calculate ventilation effects. Possible values: 158d020172841d
Default value: none
This value is optional. |
showTend |
Shows an icon indicating temperature and humidity trend (up, down, equal) Possible values: true
Default value: true
This value is optional. |
showWindow |
Shows an icon for the open state of the door/window sensors. Possible values: true
Default value: false
This value is optional. |
showLights |
Shows an icon for the state of lights in the room. Possible values: true
Default value: false
This value is optional. |
showHeating |
Shows an icon for the heating state of the MAX! system. Possible values: true
Default value: false
This value is optional. |
showNotifications |
Wether to enable visual notifications on temperature and humidity alarms. Possible values: true
Default value: true
This value is optional. |
audioNotifications |
Wether to enable audio notifications on temperature and humidity alarms. You need a MM with speakers or audio device connected. See https://www.raspberrypi.org/documentation/configuration/audio-config.md for help on setting up audio on a raspberry. Possible values: true
Default value: false
This value is optional. |
minTemperature |
Minimum temperature for indoor rooms. In case temperature drops below this value a notification is displayed (optionally also audio notification). Possible values: 18
Default value: 17
This value is optional. |
maxTemperature |
Maximum temperature for indoor rooms. In case temperature raises above this value a notification is displayed (optionally also audio notification). Possible values: 22
Default value: 99
This value is optional. |
maxHumidity |
Maximum humidity for indoor rooms. In case humidity exceeds this value a notification is displayed (optionally also audio notification). Possible values: 70
Default value: 68
This value is optional. |
celcius |
Wether the temperature should be displayed in celcius (true) or fahrenheit (false). Possible values: false
Default value: true
This value is optional. |
rooms |
List of configured rooms.
See "Room configuration options" options below. |
Option | Description |
---|---|
name |
The name of your room Possible values: Living room
Default value: none
|
sortOrder |
The sorting order for your room. Lower numbers will be sorted above higher numbers. Possible values: 20
Default value: none
|
devices |
A list of device IDs within your room. This can be all kind of (supported) devices, like temperature, door/window sensors or yeelights. Possible values: ['158d000171240d', '158d00026cddae']
Default value: none
|
Example:
modules: [
{
module: 'MMM-xiaomi',
position: 'bottom_left',
header: 'Temperature / Humidity', // This is optional
config: {
gatewayIP: '192.168.0.1',
outsideSensorId: '158d0001618421',
showWindow: true,
showVentilation: true,
showLights: false,
audioNotifications: true,
rooms: [
{
name: 'Living room',
sortOrder: 10,
devices : ['158d000171840d', '158d00016ccdae']
},
{
name: 'Bedroom',
sortOrder: 20,
devices : ['158d0001635ac2']
},
]
}
},
]
In case you need a security token to access your gateway you can provide this token via the configuration parameters. To find out the correct token do the following:
This Modul is using the MIIO library (https://github.com/aholstenson/miio).