RM4 mini 648d discovered but no learn or send

mlfunston / node-red-contrib-broadlink-control

Set of node-red nodes to manage the Broadlink home automation device suite

MIT License

44 stars 24 forks source link

RM4 mini 648d discovered but no learn or send #73

Open strandbein opened 3 years ago

strandbein commented 3 years ago

I own a new RM4 mini 648d, firmware 52078, node red running on a home assistant supervised raspi 4. I've reset it several times according to documentation. It will discoverd correctly, but neither learning nor sending. Integration via home assistant works fine, but via node red it would be nicer. Is there anything else I can do?

houser42 commented 3 years ago

hello. update/edited: just a comment that I was seeing the same. Following these instructions made it work: https://flows.nodered.org/node/node-red-contrib-broadlink-control many thanks!

Sergiogu2021 commented 3 years ago

Hi, I have the exact same issue with same device. The device is discovered, I enter IP, MAC and Id (648d) on the RM node, but I can't learn or send. And also it says on property "cloud" = false. And I was following those instructions from the beginning. I don't see what I might be doing wrong. I used the Broadlink app just until the point where you discover the device and assign it to your wifi. Right after that I exit as suggested.

houser42 commented 3 years ago

Hello @Sergiogu2021

Your device is probably in cloud mode. what worked for me was to reset the device again and then configure exactly as described in the section from the link entitled “ New Broadlink App and Cloud mode - Troubleshooting” Good luck.