======================================================================== This software is free: you can redistribute it and/or modify it under the terms of the GNU General Public License Version 3, as published by the Free Software Foundation.
This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
To find more in-depth and up-to-date information about SSL-Vision (including installation and configuration), please visit the Wiki Documentation Page:
http://code.google.com/p/ssl-vision/wiki/Manual
To get all of these packages in (k)ubuntu, run: sudo apt-get install g++ libqt4-dev libeigen2-dev protobuf-compiler libprotobuf-dev libdc1394-22 libdc1394-22-dev cmake
The system supports 1394B / Firewire 800, but it's also backward compatible with 1394A.
build the code by running:
makeThe project should build without errors or warnings.
1) depending on your OS, you might need to ensure that you have full access to the firewire devices /dev/fw This might* require logging in as root.
2) run the software using the following command:
./bin/visionOnce the software is running, you should see two empty capture frames on the right, and a data-tree structure on the left.
In this data-structure you can setup your camera parameters, such as resolution, capture mode, etc.
A quick hint: the text-field below the data-tree allows for fast search through the data-tree.
See the section of DC1394 parameters below to get an idea of what the parameters do.
Once you have them set up, you can start capturing by clicking "Image Capture/Capture Control/Start" in the data-tree.
If you expand the tree then the capture parameters are in "Image Capture/DC1394/Capture Settings"
Furthermore, conversion settings are in "Image Capture/DC1394/Conversion Settings"
"convert to mode" should currently be "yuv422"
for best performance, "capture mode" should also be "yuv422", but can also be a different format such as "yuv411" or "rgb"
Alternatively, if you desire, you can do de-bayering in software, but this will take extra CPU cycles. To do so, you would set the capture mode to e.g. "raw8" and the convert mode to "rgb". Finally, you will need to set "de-bayer" to true, and select the correct de-bayer pattern and desired method.
Capturing supports both DCAM native modes and Format7 modes. This is selected in the "capture format" field. Leaving it on "auto" will attempt native mode first, then format7_0.
By default, ISO800 support is disabled. To enable it, mark the field "use ISO800" as true.
--- ONLINE PARAMETERS: --- Once you start capturing, you should see the realtime video image on the right. Furthermore, in the data tree, you should be able to go to the "Camera Parameters" node which will then be expandable and show all of your DCAM parameters.
You can adjust all of these parameters in real-time.
Note that the read-out of these parameters from the camera only happens automatically if "auto refresh params" in the Capture Control is set to true. Otherwise, you can use the "re-read params" "Refresh" button to refresh them manually. For performance reasons, it might make sense to set auto refresh to false, so the bus is not being flooded with too much control data and has full bandwidth available for the video streaming.
When you quit the application normally (by closing the window not thru Ctrl-C) then all settings and parameters will automatically be written to a set of xml files.
All settings should be automatically restored during the next program start.
In case the files should ever become corrupted, or the program refuses to start completely when parsing the XML files (this should normally never occur) then simply delete all XML files and restart. The program should restore its default settings.