---------------------Porting uCOSII to the raspberry pi A+/B+/2B-----------------

Configure your toolchain in makefile: 1) for x86_64 host ARMGNU ?= ./tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf 2) for x86 host ARMGNU ?= ./tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf

To build, just type: make

For RPi Model A+/B+ Copy the kernel.img to the first partition (BOOT,FAT32) of the SD card.

For RPi2 Model B Copy the kernel7.img to the first partition (BOOT,FAT32) of the SD card.

User application in the usrApp folder, it used the bare-metal gpio implement.

Turn on the board, and then you will see UART message (in userAppx) and the ACT LED blink.

---Source tree--- bsp: Board support package included the interrupt, UART, timer build: The built object h: header init: Bootloader asm code lib: Standard C lib port: CPUs porting code ucos: uC/OSII source code v2.9 usrApp: main entry for user application tools: Toolchain for compilation doc: uC/OSII docs v2.9