Homebridge D-Link's DCH-S220 Wi-Fi enabled Siren Plugin

This plugin exposes the functionality of D-Link's DCH-S220 Siren as a Switch.

Install

• sudo npm install -g homebridge-dlink-siren
  • Create an accessory in your config.json file
  • Restart homebridge

Example config.json:

    "accessories": [
        {
          "accessory": "SirenSwitch",
          "name": "DLink Siren",
          "ipAddress": "192.168.1.10",
          "pin": 123456,
          "sound": 2,
          "volume": 100,
          "duration": 88888,
          "updateInterval": 2000
        }
    ]

Configuration Parameters

name: The name Homekit will give to your switch (you can change this later in Home app).

ipAddress: The IP Address of your Siren.

pin: 6 digit pin of your Siren, you can find it on the card included with it.

sound: The sound the sren will play upon turning it on, you may select one from the following list:

1 = Emergency

2 = Fire

3 = Ambulance

4 = Police

5 = Door Chime

6 = Beep

volume: Value from 1 to 100 determining the volume the siren should play at.

duration: Time in seconds the siren should play the sound (use 88888 for infinite).

updateInterval: Time in milliseconds the program will poll for siren status.