Lighthouse
A fully modular, parametric, and customizable case design for home-made ESP8266/Arduino/Raspberry Pi projects, like temperature or motion sensors, information monitors, and more.
Built with OpenSCAD.
- Thingiverse: https://www.thingiverse.com/thing:3391397
Modules
Bases
Download the SCAD source to customize your own version.
NodeMCU v2, e.g. https://www.amazon.de/dp/B06Y1LZLLY
NodeMCU v3, e.g. https://www.amazon.de/dp/B06Y1ZPNMS
OLED Module
Download the SCAD source to customize your own version.
OLED 0.96", e.g. https://www.amazon.de/dp/B01L9GC470
OLED 1.3", e.g. https://www.amazon.de/dp/B078J78R45
PIR Motion Sensor Module
HC-SR501, e.g. https://www.amazon.de/dp/B07CNBYRQ7
Download the SCAD source to customize your own version.
Sensor Enclosure Module
Download the SCAD source to customize your own version.
Empty Spacer Module
Download the SCAD source to customize your own version.
Caps
Flat
Download the SCAD source to customize your own version.
Dome
Download the SCAD source to customize your own version.
Further ideas
- The node MCU and other boards as well have mounting holes, use them for better support in the base
- The PCB modules could be fit a little bit tighter into their respective casing making it easier e.g. to push a button from the outside
- Conversion modules between the large and small diameters
Precursor of this design
This design is inspired by https://www.thingiverse.com/thing:2627220.