Usage Stats module

Presents information about network, disk, CPU, and GPU activity

This module is only supported on 10.10 and higher

Database:

• timestamp - BIGINT - timestamp of when stats were last pulled
• thermal_pressure - varchar(255) - String detailing thermal pressure of the system
• backlight_max - INT(11) - Maximum value of backlight
• backlight_min - INT(11) - Minimum value of backlight
• backlight - INT(11) - Current value of backlight
• keyboard_backlight - INT(11) - Current value of the keyboard backlight
• ibyte_rate - FLOAT - Network incoming bytes rate
• ibytes - FLOAT - Total of network incoming bytes
• ipacket_rate - FLOAT - Network incoming packets rate
• ipackets - FLOAT - Total of network incoming packets
• obyte_rate - FLOAT - Network outgoing bytes rate
• obytes - FLOAT - Total of network outgoing bytes
• opacket_rate - FLOAT - Network outgoing packets rate
• opackets - FLOAT - Total of network outgoing packets
• rbytes_per_s - FLOAT - Bytes read per second
• rops_per_s - FLOAT - Read operations per second
• wbytes_per_s - FLOAT - Bytes written per second
• wops_per_s - FLOAT - Write operations per second
• rbytes_diff - FLOAT - Total of bytes read
• rops_diff - FLOAT - Total of read operations
• wbytes_diff - FLOAT - Total of bytes written
• wops_diff - FLOAT - Total of write operations
• package_watts - FLOAT - Watts used by CPU+SA+iGPU package
• package_joules - FLOAT - Joules used by CPU+SA+iGPU package
• freq_hz - FLOAT - CPU Speed in hertz
• freq_ratio - FLOAT - CPU Fraction of Nominal Speed
• gpu_name - varchar(255) - Name of GPU in use
• gpu_freq_hz - FLOAT - GPU Speed in hertz
• gpu_freq_mhz - FLOAT - GPU Speed in megahertz
• gpu_freq_ratio - FLOAT - GPU Fraction of Nominal Speed
• gpu_busy - FLOAT - GPU cycles used
• kern_bootargs - VARCHAT(255) - boot flags used by the kernel on last boot