Open aaronsb opened 4 years ago
Looks like the Trident3 has an nct 6683. Anyway, just adding to the list of motherboards; doesn't work with --ignore-check
❯ sudo ./target/release/msi-rgb FFFFFFFF FFFFFFFF FFFFFFFF error: could not set the colour caused by: The sI/O chip identifies as c73a, which does not seem to be NCT6795D caused by: `--ignore-check` flag, which would skip the check, is not specified (may be dangerous); also try `--base-port` ❯ sudo ./target/release/msi-rgb FFFFFFFF FFFFFFFF FFFFFFFF --ignore-check ❯ sensors iwlwifi_1-virtual-0 Adapter: Virtual device temp1: +46.0°C nct6683-isa-0a00 Adapter: ISA adapter VIN5: 560.00 mV (min = +0.00 V, max = +0.00 V) VIN3: 736.00 mV (min = +0.00 V, max = +0.00 V) VIN2: 1.25 V (min = +0.00 V, max = +0.00 V) VIN3: 736.00 mV (min = +0.00 V, max = +0.00 V) VCC: 3.33 V (min = +0.00 V, max = +0.00 V) VSB: 3.30 V (min = +0.00 V, max = +0.00 V) AVSB: 3.30 V (min = +0.00 V, max = +0.00 V) VTT: 1.06 V (min = +0.00 V, max = +0.00 V) VBAT: 3.23 V (min = +0.00 V, max = +0.00 V) fan1: 883 RPM (min = 0 RPM) PECI 0.0: +48.0°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = Intel PECI Thermistor 14: +51.0°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = thermistor Diode 1 (curr): +127.5°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = thermal diode PECI 0.0: +48.0°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = Intel PECI PCH CHIP: +0.0°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) intrusion0: OK beep_enable: disabled acpitz-acpi-0 Adapter: ACPI interface temp1: +27.8°C (crit = +119.0°C) pch_cannonlake-virtual-0 Adapter: Virtual device temp1: +81.0°C coretemp-isa-0000 Adapter: ISA adapter Package id 0: +52.0°C (high = +82.0°C, crit = +100.0°C) Core 0: +48.0°C (high = +82.0°C, crit = +100.0°C) Core 1: +48.0°C (high = +82.0°C, crit = +100.0°C) Core 2: +48.0°C (high = +82.0°C, crit = +100.0°C) Core 3: +49.0°C (high = +82.0°C, crit = +100.0°C) Core 4: +52.0°C (high = +82.0°C, crit = +100.0°C) Core 5: +48.0°C (high = +82.0°C, crit = +100.0°C)
Looks like the Trident3 has an nct 6683. Anyway, just adding to the list of motherboards; doesn't work with --ignore-check