Airframe version 1
This is project repo for the airframe containing all our design and simulations for the model rocket
Table of contents
General info
This project is where our design files for the nakuja N1 rocket are placed. I designed tha parts of the rocket using Autodesk Inventor 2020.
Technologies
Project is created with:
- Autodesk Inventor 2020
- VScode
Setup
To run this project, install it locally using Inventor:
$ git clone https://github.com/nakujaproject/airframev1
$ cd airframev1
# Open Autodesk Inventor 2020 and open the design files
-
.ipt These are the part files for the various parts of the N1 rocket model.
-
.stl These are the 3D files of the respective parts.
-
.iam These are the assembly files of the N1 rocket.
-
.dwg These are 2D drawing files of the repective part files.
-
.pdf These are pdf files for the repective 2D drawing files.
Current directory structure
-
assembled This is the assembled file for the N1 rocket
-
electronicsbay This is the electronics bay where the electronics components will be attached
-
extraTube This is the extratube that provides enough stability for the rocket
-
launchlug This helps guide the rocket during launch
-
nose-basepart1 This is the base part of the nose that attaches to the body
-
nose-toppart1 This is the cover for the nose cone
-
noseAssembly This is the nose cone assembly
-
payloadchamber This is the chamber where the electronics bay will go in
-
presentation This is the presentation for assemblying the N1 rocket
-
servoarm This the extra arm added to the servo motor to ensure the cover closes
-
tail This is the tail of the rocket intergrated with the fins
